Welcome Seba! To which IP direction or hostname are you trying to connect? Which direction did you give to your PC? To which router port are you conneced? (use the LAN ports, not the WAN port) Please beware that LibreMesh does NOT use 192.168.1.1!!! I suggest you to follow step by step this guide, from the beginning trying all the suggested things. Ciao! Ilario On 4/26/19 6:34 PM, Seba Correa via lime-users wrote: > In my tl-wdr3500, and in tl-wr840 I have problems to keep the connection > via ethernet if I use LiMe. With openwrt 17.1.2 and 18.06.02 there are > no problems. > > With LiMe, I connect the cable to the lan port, assign an address, and > for a few seconds the connection persists, then the configuration is > lost and there is no way to connect. Nor if I put a fixed ip on the > computer. > > The wifi connection does not have any problem. I can only access the > router that way. > > How can I correct it? > > Thank you very much for the help. > > Sebasti??n > > > --------------------------------------------------------------------------------- > > > En mi tl-wdr3500, y en tl-wr840 tengo problemas para mantener la > conexi??n via ethernet si uso LiMe. Con openwrt 17.1.2 y 18.06.02 no hay > problemas. > > Con LiMe, conecto el cable al puerto lan, asigna una direcci??n, y > durante algunos segundos persiste la conexi??n, luego se pierde la > configuraci??n y no hay forma de conectarme. Tampoco si pongo una ip > fija en la computadora. > > La conexi??n wifi no tiene ning??n problema. Solo puedo acceder al > router de esa forma. > > C??mo puedo corregirlo? > > Muchas gracias por la ayuda. > > _______________________________________________ > lime-users mailing list > lime-users(a)lists.libremesh.org > https://lists.libremesh.org/mailman/listinfo/lime-users