On Thu, Jul 26, 2018 at 12:23:05PM +0200, Juergen Kimmel wrote:
I'm changing my QMP mesh to libremesh using using
18.06.0-rc1
Can somebody guide me to configure Picostation as gateway?
The only ethernetport is configured as LAN by default und just adding a WAN
interface did not work.
changing the network configuration in such way that the only ethernet
port is assigned to be the WAN network should work. you'll have to make
sure that watchping (see /etc/config/system) also checks for a working
default-route on that network, but then you should be fine.
BTW: When willl RC2 be available?
rc2 is online already, just not yet announced for some reason.
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users