Hi, If I assign ip addresses to the wlan0-mesh interfaces in the same c class ipv4 range I can ping all the routers in the mesh so they are all connected. AFAIK (I think) the mesh routing should be over layer 2, so what am I missing in the config setup ... anyone any ideas ? iw wlan0-mesh mpath dump DEST ADDR NEXT HOP IFACE SN METRIC QLEN EXPTIME DTIM DRET FLAGS 84:16:f9:d9:18:6e 84:16:f9:d9:18:6e wlan0-mesh 2276 141 0 4490 0 0 0x15 84:16:f9:d9:44:80 84:16:f9:d9:44:80 wlan0-mesh 2330 95 0 4490 100 0 0x15 Thanks Ruairi On Thursday 20 April 2017 11:10:07 IST Ruairi Hickey wrote: > Hi, > > As per banner below, it's > > LiMe 16.07 CommunityChaos (16.07 rev.5fbd38f 20160913_2151) > > Thanks > > Ruairi > > _______ ________ __ > > | |.-----.-----.-----.| | | |.----.| |_ > | > | - || _ | -__| || | | || _|| _| > | > |_______|| __|_____|__|__||________||__| |____| > | > |__| W I R E L E S S F R E E D O M > > ----------------------------------------------------- > CHAOS CALMER (Chaos Calmer, r49403) > ----------------------------------------------------- > > * 1 1/2 oz Gin Shake with a glassful > * 1/4 oz Triple Sec of broken ice and pour > * 3/4 oz Lime Juice unstrained into a goblet. > * 1 1/2 oz Orange Juice > * 1 tsp. Grenadine Syrup > > ----------------------------------------------------- > > ___ __ __ _______ __ > > | |_|__| |--.----.-----.| | |-----.-----| |--. > | | > | | | _ | _| -__|| | -__|__ --| | > | > |_____|__|_____|__| |_____||__|_|__|_____|_____|__|__| > > ------------------------------------------------------ > LiMe 16.07 CommunityChaos (16.07 rev.5fbd38f 20160913_2151) > ------------------------------------------------------ > http://libremesh.org > ------------------------------------------------------ > > Ruairi > > On Thursday 20 April 2017 11:34:09 IST Pau wrote: > > On 19/04/17 20:46, Ruairi Hickey wrote: > > > On Wednesday 19 April 2017 19:29:59 IST Ilario Gelmetti wrote: > > >> On 04/19/2017 05:25 PM, Ruairi Hickey wrote: > > >>> While the mesh appears to be up and the stations can see each other > > >>> there is no ip connectivity - if a client is connected to the > > >>> libremesh.org > > >>> via AP node d9:18:6e it can not connect to the internet / outside > > >>> via > > >>> AP > > >>> d9:44:80. > > >> > > >> Hi Ruairi! > > >> Have you plugged an internet connection to a WAN port of your router? > > >> If your router doesn't have a WAN port you will have to configure > > >> another one as WAN (check out /etc/config/lime-example and > > >> http://libremesh.org/docs/changing_network_behavior.html ). > > >> If this doesn't work: can you post the content of /etc/config/network > > >> on > > >> your LibreMesh router? > > >> And the output of the "ip address show" commend. > > >> > > >>> Are there additional steps required to enable this (it works > > >>> out of the box on ad- hoc) ? > > >> > > >> No, it should automagically work when you plug the WAN port of the > > >> LiMe > > >> router into a LAN port of a router offering a DHCP server and a > > >> gateway > > >> to the internet. > > >> Let us know! > > >> Ilario > > > > > > Hi Ilario, > > > > > > The WAN port is connected to the switch and if that is the only > > > router in > > > > > > up / or if I connect to that when connecting to SSID libremesh.org I > > > can > > > connect to the internet. > > > > > > If I connect to either of the other 2 nodes I cannot connect to > > > the > > > > > > Internet... > > > > The link layer seems to work fine in your setup, so the problem is > > proably in the mac or ip layer. Please, run the next test and attach the > > output: > > > > Run "bmx6 -c originators" to see all nodes in the network. > > > > Run "bmx6 -c links" to see the one-hop nodes > > > > Run "batctl o" to see the layer2 nodes > > > > Run "bmx6 -cp" on the node with Internet connection to see if the tunIn > > for sharing Internet is enabled (inet4). > > > > Cheers. > > > > > I've attached 2 text files (one for each router with the file > > > contents) > > > router connected to switch (WAN port) / Internet > > > router-d94040.txt > > > > > > router in mesh > > > router-d94480.txt > > > > > > Thanks, > > > > > > Ruairi > > > > > > (if the attachments get stripped I'll resend with the contents > > > inline..) > > > > > > > > > > > > _______________________________________________ > > > lime-users mailing list > > > lime-users(a)lists.libremesh.org > > > https://lists.libremesh.org/mailman/listinfo/lime-users > > _______________________________________________ > lime-users mailing list > lime-users(a)lists.libremesh.org > https://lists.libremesh.org/mailman/listinfo/lime-users