12 Nov
2020
12 Nov
'20
9:09 a.m.
Going back to 19.07.3 because of ethernet time out errors in ramips I got
this:
WARNING: Makefile 'package/utils/busybox/Makefile' has a dependency on
'libpam', which does not exist
WARNING: Makefile 'package/utils/busybox/Makefile' has a build dependency
on 'libpam', which does not exist
WARNING: Makefile 'package/network/utils/curl/Makefile' has a dependency on
'libgnutls', which does not exist
WARNING: Makefile 'package/network/utils/curl/Makefile' has a dependency on
'libopenldap', which does not exist
WARNING: Makefile 'package/network/utils/curl/Makefile' has a dependency on
'libidn2', which does not exist
WARNING: Makefile 'package/network/utils/curl/Makefile' has a dependency on
'libssh2', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/boot/kexec-tools/Makefile' has a dependency on
'liblzma', which does not exist
WARNING: Makefile 'package/network/services/lldpd/Makefile' has a
dependency on 'libnetsnmp', which does not exist
WARNING: Makefile 'package/network/utils/nftables/Makefile' has a
dependency on 'jansson', which does not exist
--
Regards
Jürgen
12 Nov
12 Nov
12:33 p.m.
On 11/12/20 10:09 AM, Juergen Kimmel wrote:
Going back to 19.07.3 because of ethernet time out
errors in ramips I
got this:
WARNING: Makefile 'package/utils/busybox/Makefile' has a dependency on
'libpam', which does not exist
WARNING: Makefile 'package/utils/busybox/Makefile' has a build
dependency on 'libpam', which does not exist
WARNING: Makefile 'package/network/utils/curl/Makefile' has a dependency
on 'libgnutls', which does not exist
WARNING: Makefile 'package/network/utils/curl/Makefile' has a dependency
on 'libopenldap', which does not exist
WARNING: Makefile 'package/network/utils/curl/Makefile' has a dependency
on 'libidn2', which does not exist
WARNING: Makefile 'package/network/utils/curl/Makefile' has a dependency
on 'libssh2', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/boot/kexec-tools/Makefile' has a dependency
on 'liblzma', which does not exist
WARNING: Makefile 'package/network/services/lldpd/Makefile' has a
dependency on 'libnetsnmp', which does not exist
WARNING: Makefile 'package/network/utils/nftables/Makefile' has a
dependency on 'jansson', which does not exist
How did you go back to 19.07.3?
Using "git checkout v19.07.3" ?
I suppose you'll have to delete the custom feeds.conf file, and generate
it again copying the feeds.conf.default (and adding again the LibreMesh
repositories directions, as indicated on the development page of the
website).
Then you'll have to run:
rm -rf feeds
scripts/feeds update -a
scripts/feeds install -a
and also
rm .config
make menuconfig
and select again the packages you want.
Let us know if the errors are still there!
Anyway, which "ethernet time out errors in ramips" do you refer to?
Ciao,
Ilario
--
Ilario
iochesonome(a)gmail.com
ilario(a)sindominio.net
13 Nov
13 Nov
9:40 a.m.
I went back by cloning from scratch (git clone -b v19.07.3 --single-branch
https://git.openwrt.org/openwrt/openwrt.git)
I cross checked with same result.
Am Do., 12. Nov. 2020 um 13:33 Uhr schrieb Ilario Gelmetti <
iochesonome(a)gmail.com>gt;:
On 11/12/20 10:09 AM, Juergen Kimmel wrote:
Going back to 19.07.3 because of ethernet time
out errors in ramips I
got this:
WARNING: Makefile 'package/utils/busybox/Makefile' has a dependency on
'libpam', which does not exist
WARNING: Makefile 'package/utils/busybox/Makefile' has a build
dependency on 'libpam', which does not exist
WARNING: Makefile 'package/network/utils/curl/Makefile' has a dependency
on 'libgnutls', which does not exist
WARNING: Makefile 'package/network/utils/curl/Makefile' has a dependency
on 'libopenldap', which does not exist
WARNING: Makefile 'package/network/utils/curl/Makefile' has a dependency
on 'libidn2', which does not exist
WARNING: Makefile 'package/network/utils/curl/Makefile' has a dependency
on 'libssh2', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/boot/kexec-tools/Makefile' has a dependency
on 'liblzma', which does not exist
WARNING: Makefile 'package/network/services/lldpd/Makefile' has a
dependency on 'libnetsnmp', which does not exist
WARNING: Makefile 'package/network/utils/nftables/Makefile' has a
dependency on 'jansson', which does not exist
How did you go back to 19.07.3?
Using "git checkout v19.07.3" ?
I suppose you'll have to delete the custom feeds.conf file, and generate
it again copying the feeds.conf.default (and adding again the LibreMesh
repositories directions, as indicated on the development page of the
website).
Then you'll have to run:
rm -rf feeds
scripts/feeds update -a
scripts/feeds install -a
and also
rm .config
make menuconfig
and select again the packages you want.
Let us know if the errors are still there!
Anyway, which "ethernet time out errors in ramips" do you refer to?
Ciao,
Ilario
--
Ilario
iochesonome(a)gmail.com
ilario(a)sindominio.net
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
10:37 a.m.
You choose the best way to do it :)
Looking at the first of the warnings (Busybox has a conditional
dependency on libpam, which should have no effect as the condition
should not be met) your compiler complains that libpam is not available,
but it is available in the packages repository used by 19.07.3:
https://github.com/openwrt/packages/tree/2e6bd4cb86682b224803325127d3f777d4…
Seems that you didn't updated and installed the feeds.
Please try running
scripts/feeds update -a
scripts/feeds install -a
and then running again
make menuconfig
save and run
make
Let us know if this works!
Ilario
On 11/13/20 10:40 AM, Juergen Kimmel wrote:
I went back by cloning from scratch (git clone -b
v19.07.3
--single-branch https://git.openwrt.org/openwrt/openwrt.git)
I cross checked with same result.
Am Do., 12. Nov. 2020 um 13:33 Uhr schrieb Ilario Gelmetti
<iochesonome(a)gmail.com <mailto:iochesonome@gmail.com>>:
--
Ilario
iochesonome(a)gmail.com
ilario(a)sindominio.net
On 11/12/20 10:09 AM, Juergen Kimmel wrote:
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
Going back to 19.07.3 because of ethernet time
out errors in ramips I
got this:
WARNING: Makefile 'package/utils/busybox/Makefile' has a dependency on
'libpam', which does not exist
WARNING: Makefile 'package/utils/busybox/Makefile' has a build
dependency on 'libpam', which does not exist
WARNING: Makefile 'package/network/utils/curl/Makefile' has a dependency
on 'libgnutls', which does not exist
WARNING: Makefile 'package/network/utils/curl/Makefile' has a dependency
on 'libopenldap', which does not exist
WARNING: Makefile 'package/network/utils/curl/Makefile' has a dependency
on 'libidn2', which does not exist
WARNING: Makefile 'package/network/utils/curl/Makefile' has a dependency
on 'libssh2', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/boot/kexec-tools/Makefile' has a dependency
on 'liblzma', which does not exist
WARNING: Makefile 'package/network/services/lldpd/Makefile' has a
dependency on 'libnetsnmp', which does not exist
WARNING: Makefile 'package/network/utils/nftables/Makefile' has a
dependency on 'jansson', which does not exist
How did you go back to 19.07.3?
Using "git checkout v19.07.3" ?
I suppose you'll have to delete the custom feeds.conf file, and generate
it again copying the feeds.conf.default (and adding again the LibreMesh
repositories directions, as indicated on the development page of the
website).
Then you'll have to run:
rm -rf feeds
scripts/feeds update -a
scripts/feeds install -a
and also
rm .config
make menuconfig
and select again the packages you want.
Let us know if the errors are still there!
Anyway, which "ethernet time out errors in ramips" do you refer to?
Ciao,
Ilario
--
Ilario
iochesonome(a)gmail.com <mailto:iochesonome@gmail.com>
ilario(a)sindominio.net <mailto:ilario@sindominio.net>
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org <mailto:lime-users@lists.libremesh.org>
https://lists.libremesh.org/mailman/listinfo/lime-users
11:16 a.m.
Of course I did update and install.
And very strange the verbose of scripts/feeds install -a shows among
others:
Installing package 'libcap' from packages
Installing package 'libpam' from packages
Not knowing about the possible outcome I did:
scripts/feeds install libcap
Then the next run of scripts/feeds install -a went through
No idea what happened here
Am Fr., 13. Nov. 2020 um 11:37 Uhr schrieb Ilario Gelmetti <
iochesonome(a)gmail.com>gt;:
You choose the best way to do it :)
Looking at the first of the warnings (Busybox has a conditional
dependency on libpam, which should have no effect as the condition
should not be met) your compiler complains that libpam is not available,
but it is available in the packages repository used by 19.07.3:
https://github.com/openwrt/packages/tree/2e6bd4cb86682b224803325127d3f777d4…
Seems that you didn't updated and installed the feeds.
Please try running
scripts/feeds update -a
scripts/feeds install -a
and then running again
make menuconfig
save and run
make
Let us know if this works!
Ilario
On 11/13/20 10:40 AM, Juergen Kimmel wrote:
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
--
Ilario
iochesonome(a)gmail.com
ilario(a)sindominio.net
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
I went back by cloning from scratch (git clone -b
v19.07.3
--single-branch https://git.openwrt.org/openwrt/openwrt.git)
I cross checked with same result.
Am Do., 12. Nov. 2020 um 13:33 Uhr schrieb Ilario Gelmetti
<iochesonome(a)gmail.com <mailto:iochesonome@gmail.com>>:
>
> On 11/12/20 10:09 AM, Juergen Kimmel wrote:
> > Going back to 19.07.3 because of ethernet time out errors in ramips I
> > got this:
> >
> > WARNING: Makefile 'package/utils/busybox/Makefile' has a dependency
on
> > 'libpam', which does not exist
> > WARNING: Makefile 'package/utils/busybox/Makefile' has a build
> > dependency on 'libpam', which does not exist
> > WARNING: Makefile 'package/network/utils/curl/Makefile' has a
dependency
> > on 'libgnutls', which does not
exist
> > WARNING: Makefile 'package/network/utils/curl/Makefile' has a
dependency
> > on 'libopenldap', which does
not exist
> > WARNING: Makefile 'package/network/utils/curl/Makefile' has a
dependency
> > on 'libidn2', which does not
exist
> > WARNING: Makefile 'package/network/utils/curl/Makefile' has a
dependency
on 'libssh2', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
dependency on 'libcap', which does not exist
WARNING: Makefile 'package/boot/kexec-tools/Makefile' has a dependency
on 'liblzma', which does not exist
WARNING: Makefile 'package/network/services/lldpd/Makefile' has a
dependency on 'libnetsnmp', which does not exist
WARNING: Makefile 'package/network/utils/nftables/Makefile' has a
dependency on 'jansson', which does not exist
How did you go back to 19.07.3?
Using "git checkout v19.07.3" ?
I suppose you'll have to delete the custom feeds.conf file, and generate
it again copying the feeds.conf.default (and adding again the LibreMesh
repositories directions, as indicated on the development page of the
website).
Then you'll have to run:
rm -rf feeds
scripts/feeds update -a
scripts/feeds install -a
and also
rm .config
make menuconfig
and select again the packages you want.
Let us know if the errors are still there!
Anyway, which "ethernet time out errors in ramips" do you refer to?
Ciao,
Ilario
--
Ilario
iochesonome(a)gmail.com <mailto:iochesonome@gmail.com>
ilario(a)sindominio.net <mailto:ilario@sindominio.net>
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org <mailto:lime-users@lists.libremesh.org>
https://lists.libremesh.org/mailman/listinfo/lime-users
11:26 a.m.
Next thing. make menuconfig throws:
ualBox:~/openwrt$ make menuconfig
tmp/.config-package.in:72885:error: recursive dependency detected!
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
tmp/.config-package.in:72885: symbol PACKAGE_lime-proto-batadv is selected
by PACKAGE_profile-freifunk-80211s-sae-bmx7-batadv
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
tmp/.config-package.in:72748: symbol
PACKAGE_profile-freifunk-80211s-sae-bmx7-batadv depends on
PACKAGE_kmod-cfg80211
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
tmp/.config-package.in:18772: symbol PACKAGE_kmod-cfg80211 is selected by
PACKAGE_kmod-batman-adv
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
tmp/.config-package.in:13296: symbol PACKAGE_kmod-batman-adv is selected by
PACKAGE_lime-proto-batadv
tmp/.config-package.in:138869:error: recursive dependency detected!
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
tmp/.config-package.in:138869: symbol PACKAGE_wpad-mesh-wolfssl is selected
by PACKAGE_wpad-mesh-wolfssl
Am Fr., 13. Nov. 2020 um 12:16 Uhr schrieb Juergen Kimmel <
juergenkimmel(a)gmail.com>gt;:
Of course I did update and install.
And very strange the verbose of scripts/feeds install -a shows among
others:
Installing package 'libcap' from packages
Installing package 'libpam' from packages
Not knowing about the possible outcome I did:
scripts/feeds install libcap
Then the next run of scripts/feeds install -a went through
No idea what happened here
Am Fr., 13. Nov. 2020 um 11:37 Uhr schrieb Ilario Gelmetti <
iochesonome(a)gmail.com>gt;:
You choose the best way to do it :)
Looking at the first of the warnings (Busybox has a conditional
dependency on libpam, which should have no effect as the condition
should not be met) your compiler complains that libpam is not available,
but it is available in the packages repository used by 19.07.3:
https://github.com/openwrt/packages/tree/2e6bd4cb86682b224803325127d3f777d4…
Seems that you didn't updated and installed the feeds.
Please try running
scripts/feeds update -a
scripts/feeds install -a
and then running again
make menuconfig
save and run
make
Let us know if this works!
Ilario
On 11/13/20 10:40 AM, Juergen Kimmel wrote:
--
Ilario
iochesonome(a)gmail.com
ilario(a)sindominio.net
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
I went back by cloning from scratch (git clone -b
v19.07.3
--single-branch https://git.openwrt.org/openwrt/openwrt.git)
I cross checked with same result.
Am Do., 12. Nov. 2020 um 13:33 Uhr schrieb Ilario Gelmetti
<iochesonome(a)gmail.com <mailto:iochesonome@gmail.com>>:
>
> On 11/12/20 10:09 AM, Juergen Kimmel wrote:
> > Going back to 19.07.3 because of ethernet time out errors in ramips I
> > got this:
> >
> > WARNING: Makefile 'package/utils/busybox/Makefile' has a dependency
on
> > 'libpam', which does not
exist
> > WARNING: Makefile 'package/utils/busybox/Makefile' has a build
> > dependency on 'libpam', which does not exist
> > WARNING: Makefile 'package/network/utils/curl/Makefile' has a
dependency
> > on 'libgnutls', which does not
exist
> > WARNING: Makefile 'package/network/utils/curl/Makefile' has a
dependency
> > on 'libopenldap', which does
not exist
> > WARNING: Makefile 'package/network/utils/curl/Makefile' has a
dependency
> > on 'libidn2', which does not
exist
> > WARNING: Makefile 'package/network/utils/curl/Makefile' has a
dependency
> > on 'libssh2', which does not
exist
> > WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
> > dependency on 'libcap', which does not exist
> > WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
> > dependency on 'libcap', which does not exist
> > WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
> > dependency on 'libcap', which does not exist
> > WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
> > dependency on 'libcap', which does not exist
> > WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
> > dependency on 'libcap', which does not exist
> > WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
> > dependency on 'libcap', which does not exist
> > WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
> > dependency on 'libcap', which does not exist
> > WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a
> > dependency on 'libcap', which does not exist
> > WARNING: Makefile 'package/boot/kexec-tools/Makefile' has a
dependency
> > on 'liblzma', which does not
exist
> > WARNING: Makefile 'package/network/services/lldpd/Makefile' has a
> > dependency on 'libnetsnmp', which does not exist
> > WARNING: Makefile 'package/network/utils/nftables/Makefile' has a
> > dependency on 'jansson', which does not exist
>
> How did you go back to 19.07.3?
> Using "git checkout v19.07.3" ?
> I suppose you'll have to delete the custom feeds.conf file, and
generate
it again
copying the feeds.conf.default (and adding again the LibreMesh
repositories directions, as indicated on the development page of the
website).
Then you'll have to run:
rm -rf feeds
scripts/feeds update -a
scripts/feeds install -a
and also
rm .config
make menuconfig
and select again the packages you want.
Let us know if the errors are still there!
Anyway, which "ethernet time out errors in ramips" do you refer to?
Ciao,
Ilario
--
Ilario
iochesonome(a)gmail.com <mailto:iochesonome@gmail.com>
ilario(a)sindominio.net <mailto:ilario@sindominio.net>
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org <mailto:lime-users@lists.libremesh.org>
https://lists.libremesh.org/mailman/listinfo/lime-users
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
1:01 p.m.
On 11/13/20 12:26 PM, Juergen Kimmel wrote:
Next thing. make menuconfig throws:
ualBox:~/openwrt$ make menuconfig
tmp/.config-package.in:72885:error: recursive dependency detected!
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
tmp/.config-package.in:72885: symbol
PACKAGE_lime-proto-batadv is selected by
PACKAGE_profile-freifunk-80211s-sae-bmx7-batadv
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
tmp/.config-package.in:72748: symbol
PACKAGE_profile-freifunk-80211s-sae-bmx7-batadv depends on
PACKAGE_kmod-cfg80211
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
tmp/.config-package.in:18772: symbol
PACKAGE_kmod-cfg80211 is selected by PACKAGE_kmod-batman-adv
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
tmp/.config-package.in:13296: symbol
PACKAGE_kmod-batman-adv is selected by PACKAGE_lime-proto-batadv
tmp/.config-package.in:138869:error: recursive dependency detected!
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
These issues are related to one of Freifunk's network-profiles and you
can safely ignore them unless you're going to use that specific
network-profile.
https://github.com/libremesh/network-profiles/blob/master/freifunk/80211s-s…
Maybe the warning message arises due to an unneeded dependency which
should be removed: kmod-batman-adv (it is already selected by the
lime-proto-batadv dependency).
Adding Daniel Golle to RCPT.
tmp/.config-package.in:138869: symbol
PACKAGE_wpad-mesh-wolfssl is selected by PACKAGE_wpad-mesh-wolfssl
Funny tautology. It could be related to some OpenWrt Makefiles issue
reported on
https://github.com/libremesh/lime-web/issues/125
https://bugs.openwrt.org/index.php?do=details&task_id=3441
Additionally, wpad-mesh-wolfssl could clash with wpad-basic with this
network-profile (I did not test).
Ciao!
Ilario
P.S.: for who is wondering why errors related to network-profiles are
present here: now the network-profiles repository can be used as a feed
for compiling a network profile inside a LibreMesh image!
In order to do so, each community needs to update their network-profile
to the new format:
https://github.com/libremesh/network-profiles/issues/66
and thanks to Paul Spooren's work the network-profiles can also be
installed as packages, for example with:
opkg install --force-overwrite profile-freifunk-80211s-sae-bmx7-batadv
--
Ilario
iochesonome(a)gmail.com
ilario(a)sindominio.net
1:22 p.m.
On Fri, Nov 13, 2020 at 02:01:22PM +0100, Ilario Gelmetti wrote:
Now that there is no longer a way to deselect a package, we will need
to turn it around and have a convention to always include the
wpad/hostapd/wpa_supplicant variant(s) in the network profile and
remove 'wpad-basic' and 'wpad-basic-wolfssl' from the set of default
packages. Otherwise this will always clash for profiles which require
anything else than the default.
On 11/13/20 12:26 PM, Juergen Kimmel wrote:
Thanks for testing this. I had no chance nor understanding at this
point on how to test this, Paul asked me to try to convert the profile,
I wasn't quite sure if I did that in the right way.
Removed 'kmod-batman-adv' in the hope that it may fix this.
Next thing. make menuconfig throws:
ualBox:~/openwrt$ make menuconfig
tmp/.config-package.in:72885:error: recursive dependency detected!
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
tmp/.config-package.in:72885: symbol
PACKAGE_lime-proto-batadv is selected by
PACKAGE_profile-freifunk-80211s-sae-bmx7-batadv
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
tmp/.config-package.in:72748: symbol
PACKAGE_profile-freifunk-80211s-sae-bmx7-batadv depends on
PACKAGE_kmod-cfg80211
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
tmp/.config-package.in:18772: symbol
PACKAGE_kmod-cfg80211 is selected by PACKAGE_kmod-batman-adv
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
tmp/.config-package.in:13296: symbol
PACKAGE_kmod-batman-adv is selected by PACKAGE_lime-proto-batadv
tmp/.config-package.in:138869:error: recursive dependency detected!
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
These issues are related to one of Freifunk's network-profiles and you
can safely ignore them unless you're going to use that specific
network-profile.
https://github.com/libremesh/network-profiles/blob/master/freifunk/80211s-s…
Maybe the warning message arises due to an unneeded dependency which
should be removed: kmod-batman-adv (it is already selected by the
lime-proto-batadv dependency).
Adding Daniel Golle to RCPT. tmp/.config-package.in:138869: symbol
PACKAGE_wpad-mesh-wolfssl is selected by PACKAGE_wpad-mesh-wolfssl
Funny tautology. It could be related to some OpenWrt Makefiles issue
reported on
https://github.com/libremesh/lime-web/issues/125
https://bugs.openwrt.org/index.php?do=details&task_id=3441
Additionally, wpad-mesh-wolfssl could clash with wpad-basic with this
network-profile (I did not test). Ciao!
Ilario
P.S.: for who is wondering why errors related to network-profiles are
present here: now the network-profiles repository can be used as a feed
for compiling a network profile inside a LibreMesh image!
In order to do so, each community needs to update their network-profile
to the new format:
https://github.com/libremesh/network-profiles/issues/66
and thanks to Paul Spooren's work the network-profiles can also be
installed as packages, for example with:
opkg install --force-overwrite profile-freifunk-80211s-sae-bmx7-batadv
--
Ilario
iochesonome(a)gmail.com
ilario(a)sindominio.net
1508
days inactive
1509
days old
lime-users@lists.libremesh.org
7 comments
3 participants
participants (3)
-
Daniel Golle -
Ilario Gelmetti -
Juergen Kimmel