In the case of the Ape522II connected to the ISP, it's enough to connect
it through the Ape522II's ethernet WAN port.
In the case of the PicoStation connected to the ISP, as it has only one
ethernet port and by default it is configured as LAN, you'll have to
configure it as WAN editing /etc/config/lime-node  and then you can
simply plug it to the ISP modem/router.
There's no need to further configure anything.
On 10/27/20 5:59 PM, Juergen Kimmel wrote:
My mesh consists of 3 Picostations and 4 Ape522II,
all of them are
configured as originators.
1 Picostation and 2 Ape522II are connected to two different ISP routers.
Should they be configured as gateways? And if so how to do it?