hi! we just installed lime_mini into our tplink wr841n v11 nodes, but we're a bit confused about the setup. it created three wifi on radio0, one is a mesh point and the two others are ap. but when we tried to disable the aps, the mesh wifi stopped working. first we disabled the config for the ap wifis on /etc/config/wireless and after `wifi off` and `wifi on`, the mesh point would be recreated but without an ssid. later we removed the 'ap' y 'apname' from /etc/config/lime and ran `lime-config`, which did the same we did manually, with the same results. what would be the config for just running mesh points? :D -- }(:= _______________________________________________ lime-users mailing list lime-users(a)lists.libremesh.org https://lists.libremesh.org/mailman/listinfo/lime-users

Nicolas Pace <nico(a)libre.ws> writes: nope, but since we only have single radio routers, we wanted to have some as mesh points and some as APs, as modante says. is that possible? in my experience, having two wifi modes on the same radio makes the router unstable (though i tried with client+ap modes). :D modante(a)disroot.org writes: thanks, it's what we did but the mesh node stopped working, so it's a bug? we used the latest release :) later i realized `wifi` doesn't work with on/off (anymore?) but the problem persists after rebooting. i'll come back with more technical details! -- http://librevpn.org.ar _______________________________________________ lime-users mailing list lime-users(a)lists.libremesh.org https://lists.libremesh.org/mailman/listinfo/lime-users

gio prepared a configuration for us specific to the wr841N that we are using very successfully on 9 machines in can masdeu (a community in Barcelona) which removed batman, bmx6, ad-hoc, and other components, and would do the trick - if you are connecting the routers via LAN cable. I am very happy with it, you can download the image here: https://mega.nz/#!BWZE2CrB!BC-ic0mUM4UTXwP-zmxjdnEF-Hli5zUIJ0V-dDcmm-g unfortunately I don't remember where the configuration files were stored, on github or someplace else... gio? here is the configuration of /etc/config/lime, for what it's worth: config lime 'system' option hostname 'cmd-capilla' option domain 'lan' config lime 'network' option primary_interface 'eth0' list resolvers '4.2.2.2' list resolvers '141.1.1.1' list resolvers '2001:470:20::2' list protocols 'lan' option main_ipv4_address '10.13.0.0/16' option main_ipv6_address '2a00:1508:0a%M4:%M600::/64' config lime 'wifi' list modes 'ap' option ap_ssid 'CanMasdeu' option distance '1000' option htmode_5ghz 'HT40' option channel_2ghz '11' option channel_5ghz '48' ~ On Tue, Jun 19, 2018 at 3:06 AM, <modante(a)disroot.org> wrote: > Once time ago I used a router with libremesh only for mesh and wired to > another acting like AP. > I think is not a problem to remove the AP and apname. > Regards :-) > > 15 de junio de 2018 17:26, "fauno" <fauno(a)endefensadelsl.org> escribió: > > hi! we just installed lime_mini into our tplink wr841n v11 nodes, but > > we're a bit confused about the setup. it created three wifi on radio0, > > one is a mesh point and the two others are ap. but when we tried to > > disable the aps, the mesh wifi stopped working. > > > > first we disabled the config for the ap wifis on /etc/config/wireless > > and after `wifi off` and `wifi on`, the mesh point would be recreated > > but without an ssid. later we removed the 'ap' y 'apname' from > > /etc/config/lime and ran `lime-config`, which did the same we did > > manually, with the same results. > > > > what would be the config for just running mesh points? :D > > > > -- > > }(:= > > > > _______________________________________________ > > lime-users mailing list > > lime-users(a)lists.libremesh.org > > https://lists.libremesh.org/mailman/listinfo/lime-users > > _______________________________________________ > lime-users mailing list > lime-users(a)lists.libremesh.org > https://lists.libremesh.org/mailman/listinfo/lime-users