12 Mar
2021
12 Mar
'21
5:34 p.m.
My Picostations don't work as gateways anymore.
I think it's because Picostations have one Ethernet port only.
Maybe it is about lime-hwd-openwrt-wan
I also see there are many upgrades dating from today.
Is something important going on?
--
Regards
Juergen
12 Mar
12 Mar
6:07 p.m.
On 3/12/21 6:34 PM, Juergen Kimmel wrote:
My Picostations don't work as gateways anymore.
I think it's because Picostations have one Ethernet port only.
Maybe it is about lime-hwd-openwrt-wan
I also see there are many upgrades dating from today.
Is something important going on?
I don't think that any recent change touched that.
What I think is happening is that the PicoStation only ethernet port is
configured by OpenWrt as a LAN port by default, so lime-hwd-openwrt-wan
does not touch it (what lime-hwd-openwrt-wan does is: "if OpenWrt think
this port is WAN, so set it as WAN", nothing else).
In order to set that port as WAN you have to add in
/etc/config/lime-node an interface specific configuration as described here:
https://libremesh.org/docs/en_changing_network_behavior.html
and here:
https://github.com/libremesh/lime-packages/blob/2b7226a8d249553e5e7fe3ab8e4…
Ciao!
Ilario
--
Ilario
iochesonome(a)gmail.com
ilario(a)sindominio.net
13 Mar
13 Mar
10:32 a.m.
I did this before by hand and it was working until I invoked creating
network by lime-app
Lime-app did a reset of lan interface and deleted the wan interface
Ausserdem, obwohl ich in luci-interfaces das wlan interface sehe gibt
lime-config
Clearing wireless config...
Clearing network config...
Disabling odhcpd
sh: /etc/init.d/odhcpd: not found
Cleaning dnsmasq
Disabling 6relayd...
*No wan interface detected*
lime.proto.babeld.configure(...)
Use fallback value for network.babeld_over_librenet6: false
lime.proto.babeld.setup_interface(...)
lime.proto.babeld.setup_interface(...)
lime.proto.babeld.setup_interface(...)
Configuring system...
Let uhttpd listen on IPv4/IPv6
Applying generic configs:
uhttpd_https
Done applying generic configs.
Copying assets:
Done copying assets.
Running assets on ATCONFIG :
Done running assets.
Am Fr., 12. März 2021 um 19:07 Uhr schrieb Ilario Gelmetti <
iochesonome(a)gmail.com>gt;:
On 3/12/21 6:34 PM, Juergen Kimmel wrote:
My Picostations don't work as gateways
anymore.
I think it's because Picostations have one Ethernet port only.
Maybe it is about lime-hwd-openwrt-wan
I also see there are many upgrades dating from today.
Is something important going on?
I don't think that any recent change touched that.
What I think is happening is that the PicoStation only ethernet port is
configured by OpenWrt as a LAN port by default, so lime-hwd-openwrt-wan
does not touch it (what lime-hwd-openwrt-wan does is: "if OpenWrt think
this port is WAN, so set it as WAN", nothing else).
In order to set that port as WAN you have to add in
/etc/config/lime-node an interface specific configuration as described
here:
https://libremesh.org/docs/en_changing_network_behavior.html
and here:
https://github.com/libremesh/lime-packages/blob/2b7226a8d249553e5e7fe3ab8e4…
Ciao!
Ilario
--
Ilario
iochesonome(a)gmail.com
ilario(a)sindominio.net
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
1388
days inactive
1389
days old
lime-users@lists.libremesh.org
2 comments
2 participants
participants (2)
-
Ilario Gelmetti -
Juergen Kimmel