14 Jun
2017
14 Jun
'17
9:15 p.m.
I downloaded and flashed binaries for vocore2 and ape522ii and both turned
out to be in adhoc mode?
14 Jun
14 Jun
9:35 p.m.
I just cooked and flashed a ArcherC50 in 11s and it show as mesh, not adhoc.
I used this command:
./cooker -c ramips/mt7620 --profile=ArcherC50 --flavor=lime_default
--community=libremesh/11s
SSID:
Mode: Mesh Point
Channel: 11 (2.462 GHz)
Bitrate: ? Mbit/s
BSSID: undefined
Encryption: -
Still need to flash another router to see if they'll mesh...
On Wed, Jun 14, 2017 at 6:15 PM, Juergen Kimmel <juergenkimmel(a)gmail.com> wrote:
I downloaded and flashed binaries for vocore2 and
ape522ii and both turned
out to be in adhoc mode?
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
--
bruno(a)pobox.com ▀─█▄██▄▀▄
http://brunovianna.net ─█▄██▄▀█▀█▄
skype: randomico▀─█▄██▄▀█▀█▄▌██─█▌█▌
15 Jun
15 Jun
12:02 a.m.
New subject: [lime-users] Precompiled binaries (11s) from http://repo.libremesh.org/current/
On 06/14/2017 11:15 PM, Juergen Kimmel wrote:
I downloaded and flashed binaries for vocore2 and
ape522ii and both
turned out to be in adhoc mode?
I also noted it and reported to Pau, anyway images are getting
recompiled right now (if you check repo.libremesh.org now is empty) and
I hope new images will be corrected.
18 Jun
18 Jun
7:16 p.m.
Repo.libremesh.org still not completely populated. Cooking also not
possible because most imagebuilder are not ready anymore.
Ilario Gelmetti <iochesonome(a)gmail.com> schrieb am Do., 15. Juni 2017 02:02:
On 06/14/2017 11:15 PM, Juergen Kimmel wrote:
I downloaded and flashed binaries for vocore2 and
ape522ii and both
turned out to be in adhoc mode?
I also noted it and reported to Pau, anyway images are getting
recompiled right now (if you check repo.libremesh.org now is empty) and
I hope new images will be corrected.
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users 
20 Jun
20 Jun
4:07 p.m.
New subject: [lime-users] Precompiled binaries (11s) from http://repo.libremesh.org/current/
11s is now enabled by default on LibreMesh, so using last develop branch
you don't need to use anymore the dirty hack of --community=libremesh/11s
Last binaries can be found at http://repo.libremesh.org (still compiling...)
On 18/06/17 21:16, Juergen Kimmel wrote:
Repo.libremesh.org still not completely populated.
Cooking also not
possible because most imagebuilder are not ready anymore.
Ilario Gelmetti <iochesonome(a)gmail.com> schrieb am Do., 15. Juni 2017 02:02:
--
./p4u
On 06/14/2017 11:15 PM, Juergen Kimmel wrote:
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
I downloaded and flashed binaries for vocore2 and
ape522ii and both
turned out to be in adhoc mode?
I also noted it and reported to Pau, anyway images are getting
recompiled right now (if you check repo.libremesh.org now is empty) and
I hope new images will be corrected.
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
2510
days inactive
2516
days old
lime-users@lists.libremesh.org
4 comments
4 participants
participants (4)
-
bruno vianna -
Ilario Gelmetti -
Juergen Kimmel -
Pau