17 May
2017
17 May
'17
9:06 p.m.
Hello everyone (and Pau specially)
In our efforts to replace the wdr3500/3600 as the most accessible dual
band routers, I came across tp-link archer c50, which is pretty
inexpensive in Brazil.
The SoC is a MediaTek MT7620A, so before buying one I tried to cook an
image for mediatek with the command:
./cooker -c mediatek/generic --profile=Default --flavor=lime_default
But after a while it fails. The log file is attached. Any help is appreciated!
Bruno
--
bruno(a)pobox.com ▀─█▄██▄▀▄
http://brunovianna.net ─█▄██▄▀█▀█▄
skype: randomico▀─█▄██▄▀█▀█▄▌██─█▌█▌
18 May
18 May
8:40 a.m.
On 17/05/17 23:06, bruno vianna wrote:
Hello everyone (and Pau specially)
In our efforts to replace the wdr3500/3600 as the most accessible dual
band routers, I came across tp-link archer c50, which is pretty
inexpensive in Brazil.
The SoC is a MediaTek MT7620A, so before buying one I tried to cook an
image for mediatek with the command:
./cooker -c mediatek/generic --profile=Default --flavor=lime_default
But after a while it fails. The log file is attached. Any help is appreciated!
Bruno
Hi Bruno.
You can see the available targets on cooker by executing:
./cooker --targets
The target for Archer C50 is ramips/mt7620 not mediatek/generic.
Then you can see the available profiles of targets executing:
./cooker --profiles=ramips/mt7620
Here you can find the current precompiled binaries:
http://repo.libremesh.org/lime-17.04/targets/ramips/mt7620/ArcherC50/
Cheers.
PS: let us know please if Archer C50 works fine
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
--
./p4u
1:12 p.m.
Great! Thanks.
I'll publish here the results.
On Thu, May 18, 2017 at 5:40 AM, Pau <pau(a)dabax.net> wrote:
On 17/05/17 23:06, bruno vianna wrote:
--
bruno(a)pobox.com ▀─█▄██▄▀▄
http://brunovianna.net ─█▄██▄▀█▀█▄
skype: randomico▀─█▄██▄▀█▀█▄▌██─█▌█▌
Hello everyone (and Pau specially)
In our efforts to replace the wdr3500/3600 as the most accessible dual
band routers, I came across tp-link archer c50, which is pretty
inexpensive in Brazil.
The SoC is a MediaTek MT7620A, so before buying one I tried to cook an
image for mediatek with the command:
./cooker -c mediatek/generic --profile=Default --flavor=lime_default
But after a while it fails. The log file is attached. Any help is appreciated!
Bruno
Hi Bruno.
You can see the available targets on cooker by executing:
./cooker --targets
The target for Archer C50 is ramips/mt7620 not mediatek/generic.
Then you can see the available profiles of targets executing:
./cooker --profiles=ramips/mt7620
Here you can find the current precompiled binaries:
http://repo.libremesh.org/lime-17.04/targets/ramips/mt7620/ArcherC50/
Cheers.
PS: let us know please if Archer C50 works fine
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
--
./p4u
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
7:34 p.m.
Quick question before flashing: the cooker only did the sysupgrade version.
Also in the precompiled repo, there is no factory image, only sysupgrade.
Should I use it anyway?
On Thu, May 18, 2017 at 5:40 AM, Pau <pau(a)dabax.net> wrote:
On 17/05/17 23:06, bruno vianna wrote:
--
bruno(a)pobox.com ▀─█▄██▄▀▄
http://brunovianna.net ─█▄██▄▀█▀█▄
skype: randomico▀─█▄██▄▀█▀█▄▌██─█▌█▌
Hello everyone (and Pau specially)
In our efforts to replace the wdr3500/3600 as the most accessible dual
band routers, I came across tp-link archer c50, which is pretty
inexpensive in Brazil.
The SoC is a MediaTek MT7620A, so before buying one I tried to cook an
image for mediatek with the command:
./cooker -c mediatek/generic --profile=Default --flavor=lime_default
But after a while it fails. The log file is attached. Any help is appreciated!
Bruno
Hi Bruno.
You can see the available targets on cooker by executing:
./cooker --targets
The target for Archer C50 is ramips/mt7620 not mediatek/generic.
Then you can see the available profiles of targets executing:
./cooker --profiles=ramips/mt7620
Here you can find the current precompiled binaries:
http://repo.libremesh.org/lime-17.04/targets/ramips/mt7620/ArcherC50/
Cheers.
PS: let us know please if Archer C50 works fine
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
--
./p4u
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
19 May
19 May
6:41 p.m.
so, I got the c50, and it was actually v2 and not v1.
https://wikidevi.com/wiki/TP-LINK_Archer_C50_v2.x
it uses qualcomm atheros qca9557, which should work with ar71xx.
but i couldn't find a profile nowhere :/
any ideas?
On Thu, May 18, 2017 at 5:40 AM, Pau <pau(a)dabax.net> wrote:
On 17/05/17 23:06, bruno vianna wrote:
--
bruno(a)pobox.com ▀─█▄██▄▀▄
http://brunovianna.net ─█▄██▄▀█▀█▄
skype: randomico▀─█▄██▄▀█▀█▄▌██─█▌█▌
Hello everyone (and Pau specially)
In our efforts to replace the wdr3500/3600 as the most accessible dual
band routers, I came across tp-link archer c50, which is pretty
inexpensive in Brazil.
The SoC is a MediaTek MT7620A, so before buying one I tried to cook an
image for mediatek with the command:
./cooker -c mediatek/generic --profile=Default --flavor=lime_default
But after a while it fails. The log file is attached. Any help is appreciated!
Bruno
Hi Bruno.
You can see the available targets on cooker by executing:
./cooker --targets
The target for Archer C50 is ramips/mt7620 not mediatek/generic.
Then you can see the available profiles of targets executing:
./cooker --profiles=ramips/mt7620
Here you can find the current precompiled binaries:
http://repo.libremesh.org/lime-17.04/targets/ramips/mt7620/ArcherC50/
Cheers.
PS: let us know please if Archer C50 works fine
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
--
./p4u
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users 
21 May
21 May
8:17 a.m.
On 05/19/2017 08:41 PM, bruno vianna wrote:
so, I got the c50, and it was actually v2 and not v1.
https://wikidevi.com/wiki/TP-LINK_Archer_C50_v2.x
it uses qualcomm atheros qca9557, which should work with ar71xx.
but i couldn't find a profile nowhere :/
I can't find any info regarding support in LEDE or in OpenWrt for v2....
If this version is not supported by LEDE/OpenWrt we can't add support
for LibreMesh :/
Can you verify this?
Bye!
Ilario
7:14 p.m.
yes, i looked all over lede and openwrt, there is no support. :/
i posted a few messages to see if someone would be able to help.
it seems like there are drivers for all chips, it would only be a
matter of putting packages together.
i wonder how difficult to get this working...
On Sun, May 21, 2017 at 5:17 AM, Ilario Gelmetti <iochesonome(a)gmail.com> wrote:
On 05/19/2017 08:41 PM, bruno vianna wrote:
--
bruno(a)pobox.com ▀─█▄██▄▀▄
http://brunovianna.net ─█▄██▄▀█▀█▄
skype: randomico▀─█▄██▄▀█▀█▄▌██─█▌█▌
so, I got the c50, and it was actually v2 and not
v1.
https://wikidevi.com/wiki/TP-LINK_Archer_C50_v2.x
it uses qualcomm atheros qca9557, which should work with ar71xx.
but i couldn't find a profile nowhere :/
I can't find any info regarding support in LEDE or in OpenWrt for v2....
If this version is not supported by LEDE/OpenWrt we can't add support
for LibreMesh :/
Can you verify this?
Bye!
Ilario
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
2538
days inactive
2542
days old
lime-users@lists.libremesh.org
6 comments
3 participants
participants (3)
-
bruno vianna -
Ilario Gelmetti -
Pau