so, as i had mentioned to nicolas some time ago, i'd like to encrypt and tunnel the whole traffic of a local network and would like to try do it in a raspi. i actually tried this configuration and it works really well. i made a post in portuguese [1], based on this [2]. all traffic routed to the raspi is sent over to a openvpn server. i actually changed the dhcp server on a openwrt router to give out the raspi address as gateway to all clients in the network, making the whole thing transparent to the users. now the question is, of course, how to get this working in libre-mesh? simply changing the /etc/config/dhcp didn't work, since alfred seems to be the one filling dhcp requests. also, there seems to be two approaches: this first one would be to change the gateway in the clients when they receive the dhcp lease. the other would be to keep the localnode gateways (x.x.0.1) and route the traffic from them to the raspi. then there is also the issue of having more than one exits to the internet. right now the raspi is hardwired to the actual exit gateway (outside libre-mesh). but it could be automagically updated to use the best exit. it also nice to have the raspi physically close to the exit, so that that less internal bandwidth is wasted. any thoughts? thanks! bruno [1]http://www.brunovianna.net/documenta/?p=93 [2]https://gist.github.com/superjamie/ac55b6d2c080582a3e64 -- bruno(a)pobox.com ▀─█▄██▄▀▄ http://brunovianna.net ─█▄██▄▀█▀█▄ skype: randomico▀─█▄██▄▀█▀█▄▌██─█▌█▌