lime-dev July 2019

lime-dev@lists.libremesh.org

4 participants
3 discussions

Re: [lime-dev] Cannot find LiMe → lime-proto-anygw building from source

by David Medland-Slater

Very much appreciated! I'll give that a go.... On 21/07/19 8:31 pm, SAn wrote: > Hi David! > > I think the problem is that the documentation is not in sync with the last developments we have been doing moving away from alfred to maintain shared state and using a new development called shared-state do do it. So now lime-proto-anygw depends on shared-state-dnsmasq_leases instead of dnsmasq-lease-share. Sorry about this! We will fix the docs. > > Here you can find the config that we are using for the LibreRouter firmware: https://github.com/LibreRouterOrg/openwrt/blob/librerouter-18.06/configs/de… . We have been keeping this config in sync with libremesh-development. > > Best! > SAn > > On 7/21/19 2:28 AM, David Medland-Slater wrote: >> Well at least I'm not going mad then! Could I perhaps ask for some >> general advice Mark on building a more up to date libremesh. I'm >> running the released version but on another project I've found plain >> vanilla openwrt 18 is considerably better than 17. Is there a sensible >> path to get a libremesh 18? This is for a home lab, nothing fancy >> running only 3 nodes, so it doesn't need to be production quality. I >> had hoped the development.html web page would be enough to give me >> working build options, but as you have seen, I'm not making much progress. >> >> With v17, I make use of the distributed DHCP, although I could live >> without that if it was problematic. >> >> Thanks in advance ... >> >> On 21/07/19 8:49 am, Mark Birss wrote: >>> yes, lime-proto-anygw disappear when selecting dnsmasq-lease-share. >>> >>> but seems i dont use it for my builds. I use BATMAN-adv gw mode >>> >>> >>> On Sat, Jul 20, 2019 at 10:25 PM David Medland-Slater >>> <david.medlandslater(a)gmail.com <mailto:david.medlandslater@gmail.com>> >>> wrote: >>> >>> Yes that gives me the same result Mark. For me then, at the point of >>> running menuconfig, lime-proto-anygw is visible. Enable >>> dnsmasq-lease-share and it disappears. As from the docs both need >>> to be >>> selected, I appear to be stuck. >>> >>> Do you get the same effect; selecting dnsmasq-lease-share makes >>> lime-proto-anygw disappear and if you search, it has been deselected? >>> >>> >>> On 21/07/19 6:58 am, Mark Birss wrote: >>> > echo "CONFIG_PACKAGE_dnsmasq=n" >> .config >>> > echo "CONFIG_PACKAGE_dnsmasq-dhcpv6=y" >> .config >>> > echo "CONFIG_PACKAGE_odhcpd=n" >> .config >>> > make defconfig >>> _______________________________________________ >>> lime-dev mailing list >>> lime-dev(a)lists.libremesh.org <mailto:lime-dev@lists.libremesh.org> >>> https://lists.libremesh.org/mailman/listinfo/lime-dev >>> >>> >>> _______________________________________________ >>> lime-dev mailing list >>> lime-dev(a)lists.libremesh.org >>> https://lists.libremesh.org/mailman/listinfo/lime-dev >> _______________________________________________ >> lime-dev mailing list >> lime-dev(a)lists.libremesh.org >> https://lists.libremesh.org/mailman/listinfo/lime-dev >>

4 years, 12 months

Cannot find LiMe → lime-proto-anygw building from source

by David Medland-Slater

Hi - I'm following : https://www.libremesh.org/development.html and it mentions selecting the LibreMesh pages which I've done, but I cannot seem to find * LiMe → lime-proto-anygw anywhere in the make menuconfig. I can find all the others mentioned in this documentation, but not this one. Any advice appreciated....

5 years

Expired certificate and lists check

by amuza

Hi. Yesterday I sent an email to lime-users(a)lists.libremesh.org saying the certificate for libremesh.org got expired. I still have not received that email from the list. Is it possible that there is also a problem with the users' mailing list? Let's see if now I receive this one... Cheers

5 years

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

lime-dev July 2019