26 Dec
2015
26 Dec
'15
4:50 p.m.
On 12/26/2015 05:40 PM, Gio wrote:
Initially I was planning to use a L2 only setup.
Anyway I prefer to stay closer to default conf and to use L2 + L3 +
anygw setup (even if I'm completely unable to debug a such complex setup).
Ok.
Thanks!
Ilario
--
Ilario Gelmetti
iochesonome(a)gmail.com
igelmetti(a)iciq.es
ilario.gelmetti(a)estudiants.urv.cat
On Saturday 26 December 2015 13:34:12 Ilario Gelmetti
wrote:
Ah, ok.
Hi all!
Why the module batman-adv-auto-gw-mode is not included in lime-full?
Does it have a negative impact when all the remaining lime-full modules
are active?
lime-full default configuration does use L2 + L3 + anygw in this setup batman-
adv-auto-gw-mode is not needed and may cause unexpected behavior I would like
to understand this because I'm going to use a set-up with
lime-full + lime-hwd-ground-routing + batman-adv-auto-gw-mode.
If you do L2 + L3 routing then that package will be probably fooled, if you
are doing L2 only i would not depend on lime-full And
lime-hwd-usbradio? Isn't safe to include it in standard Libre-Mesh?
It is suggested to use and include it only if there is no other option, USB
radios does usually have broken drivers awful performance and strange
limitation like to associate to max 8 or 6 other stations -_- so better not
include it in default conf