Re: [lime-dev] quick comments about bmx6

Hey Gui Thanks for that info. I'll add it... /axel On 10/05/2013 10:48 PM, Gui Iribarren wrote: > just to note down what we talked yesterday: > > 1) on the wiki, > http://bmx6.net/projects/bmx6/wiki/Wiki#Blocked-Nodes there's no > mention at all that the module "ip6_tunnel" is needed, probably > useful to note on compile/install section? > > 2) there's also no documentation whatsoever about globalPrefix > > only thing i could find is on the help: > > --globalPrefix <NETWORK>/<PREFIX-LENGTH> specify global prefix > for interfaces > > but from what i tried, if a globalPrefix is set for an interface > (or globally) and the interface doesn't have any ip on that > prefix, then it does not get an autoconfigured fd66:66:66 either, > and the interface stays disabled. I don't know if that's on > purpose, i expected that if the interface had no address in that > prefix, it would get activated anyway with the usual fd66:66:66. > in any case maybe doc should be more verbose about how it works? > > > finally, > > 3) you asked for some links about tunnels: > > tinc-vpn is the mesh vpn, that works perfectly and is a great > idea, but being userspace it kills cpu with high traffic > http://tinc-vpn.org/ > > tunneldigger was made by slovenian people, is a simple userspace > daemon that sets up L2TP tunnels (kernelspace) to a set of > tunnel "servers" > > https://wlan-si.net/en/blog/2012/10/29/tunneldigger-the-new-vpn-solution/ > > >

_______________________________________________ Dev mailing list Dev(a)lists.libre-mesh.org https://lists.libre-mesh.org/mailman/listinfo/dev