[lime-dev] Porting Libre Mesh into MP02-AWD

Hi everyone, I've following the list for quite some time and it was only in the last month that I got myself together and installed LiMe in some Mesh Potatoes (based on Dragino MS14) that I had with me. In Zenzeleni we've been using MPs and VillageTelco firmware from the beginning, and although they are "very Plug & Play" and easy to use for non-geeks, I was pretty impressed by LiMe. What you have done making IP disappear is quite something as it is one of the concepts people struggle with the most. So now, we are seriously considering using LiMe at Zenzeleni. However, we need a bit of guidance on creating a built for the MP02-AWD which is the hardware we have in our networks. It is based on the Dragino MS14, so the internal radio works from scratch after flashing. However, I'd like to add the secondary radio (ralink usb) to the build, and have the wireless config files modified accordingly, so it works directly after being flashed. Anyone keen to guide me about how to do it? Thanks in advance, carlos -- Carlos Rey-Moreno, PhD PostDoctoral Fellow University of the Western Cape Zenzeleni Networks: zenzeleni.net https://www.youtube.com/watch?v=YxTPSWMX26M Cel: +27 (0) 76 986 3633 <+27%2076%20986%203633> Skype: carlos.reymoreno Twitter: Creym