14 Jan
2014
14 Jan
'14
5:13 p.m.
Sorry, I forgot to specify the model of my devices:
1) Ubiquiti PicoStation M2 HP [1]
Processor Atheros MIPS 24KC, 400 MHz
Memory 32 MB SDRAM, 8 MB Flash
Ethernet Port 1 x 10/100
2) Ubiquiti NanoStation M5 [2]
Processor Atheros MIPS 24KC, 400 MHz
Memory 32 MB SDRAM, 8 MB Flash
Ethernet Ports 2 x 10/100
For both these devices the target image should be ar71xx [3]
and from [4]
"The bullet-m image is the base of the airmax series."
"The nano-m image is the bullet-m with an additionnal ethernet."
Bye,
Ilario
[1] http://www.ubnt.com/downloads/datasheets/picostationm/picom2hp_DS.pdf
[2] http://www.ubnt.com/downloads/datasheets/nanostationm/nsm_ds_web.pdf
[3] http://wiki.openwrt.org/toh/start#ubiquiti
[4] http://wiki.openwrt.org/toh/ubiquiti/airmaxm
Il 14/01/2014 12:41, Pau ha scritto:
I think bullet M is ar71xx but PicoStation is Atheros
24xx (same of
Fonera). So you should compile for such a target (named Atheros in OpenWrt).
Personally I don't recomend such devices since the CPU is very slow
(180MHz), same for the internal flash. If you want a similar device buy
a Bullet M2/M5 or Rocket M2/M5 which has a newer and faster CPU (400MHz).
Cheers.
On 01/14/14 00:55, Ilario Gelmetti wrote:
> Hi all!
> I compiled libre-mesh encountering only a small problem: subversion is
> needed but missing in the dependencies list.
> I was planning to flash libre-mesh on Ubiquiti PicoStation and Ubiquiti
> NanoStation.
> Can I safely flash using
> libre-mesh/images/bin/openwrt-ar71xx-generic-ubnt-bullet-m-squashfs-sysupgrade.bin
> and openwrt-ar71xx-generic-ubnt-nano-m-squashfs-sysupgrade.bin or some
> configuration is needed before compilation or after flashing?
> Thanks and bye,
> Ilario, Ninux Verona.
--
Ilario Gelmetti
iochesonome(a)gmail.com
ilario.gelmetti(a)sns.it