Re: [lime-dev] nuevo miembro en la lista

Ok, so you can not get your essid on firmware like you can get it with chef. But only need to use this "justoneclick" for your network based on "justoneclick" in garraflliure.guifi.net mesh network (after flashing with generic Libre-mesh Gioacchino offer to you): http://ca.wiki.guifi.net/wiki/Garraflliure.guifi.net You can use directly same "Part fixa", but please change IP for "Part variable" with IP and range 10.1.120.0/21 (is IP for your neighbourhood). I'm going to keep them for you. You have 7 routers, so 10.1.120.2/21 for first one, 10.1.120.33/21 for second one, 10.1.120.65/21,... plus 32 each one (10.1.120.1 is free for anygw purposes) In IPv6, please use uci set lime.network.main_ipv6_address=2a00:1508:a01:8400::2/64 in first one 2nd: 2a00:1508:a01:8400::33/64 3rd: 2a00:1508:a01:8400::65/64 ... You need to do it in each router. You'll have routed IPs inside guifi.net soon. It is not an "elegant" way to do it, but it is just one to make it work before Chef will be fully functional. ----- Mensaje original -----