7 Sep
2016
7 Sep
'16
12:55 a.m.
Thank Pau,
Just reran with -j1 V=s and it compiled fine. I think this might be a
similar issue I experienced before where trying to compile with J > 1
doesn't work. I guess I'll just always use 1 for now.
By the way I had installed all the packages from README before compiling
the first time.
On 09/06/2016 05:37 AM, Pau wrote:
Hi Marvin.
We cannot help you if you do not post the result of "-j1 V=s". You can
execute:
make T=ar71xx P=generic J=1 V=s
Probably there is some missing dependency on your Ubuntu system required
for building OpenWRT. On the README you can find a list of packages
which you might install before compiling [1].
The binaries of http://builds.libre-mesh.org for release 16.07 should
work fine.
Cheers.
[1] https://github.com/libre-mesh/lime-build/blob/develop/README.md
On 06/09/16 03:17, Marvin Arnold wrote:
Trying to get caught up after some time away and
having trouble
building. This was with a fresh git clone running Ubuntu 16.04 x64. I
didn't try running again with `-j1 V=s` yet.
http://pastebin.com/k4cU8Uyj
Also, if I understand the recent threads, downloads.libre-mesh should be
ignored until it gets pointed to builds.libre-mesh?
On 07/18/2016 11:15 AM, Ilario wrote:
_______________________________________________
Dev mailing list
Dev(a)lists.libre-mesh.org
https://lists.libre-mesh.org/mailman/listinfo/dev 2016-07-11 20:49 GMT+02:00 p4u <pau(a)dabax.net
<mailto:pau@dabax.net>>:
From the README: Or to use your own LiMe packages git repository
and/or OpenWRT/LEDE (must be executed the first time make is
invoked or after clean).
make LIME_GIT="http://foo.git" <http://foo.git> T=ar71xx
P=generic OWRT_GIT="http://foo.git" <http://foo.git>
I tried to compile LiMe on LEDE using lime-build develop, I simply issued:
make T=ar71xx P=generic
OWRT_GIT="https://git.lede-project.org/source.git"
but I noticed that there are lines in the feeds.conf file [1] included
in lime-build which are pointing to our static OpenWrt repos.
So, what is a good procedure to build LiMe on LEDE using lime-build?
Is it enough to remove those lines in the feeds.conf file and specify
the OWRT_GIT parameter pointing to LEDE source?
Thanks,
Ilario
[1] https://github.com/libre-mesh/lime-build/blob/develop/feeds.conf
_______________________________________________
Dev mailing list
Dev(a)lists.libre-mesh.org
https://lists.libre-mesh.org/mailman/listinfo/dev
_______________________________________________
Dev mailing list
Dev(a)lists.libre-mesh.org
https://lists.libre-mesh.org/mailman/listinfo/dev