Hi Carlos.
I like to help you, but I like to know if you tried already some
libremesh firmware. Is the MP02-AWM supported by an official target of
LEDE? I see the Dragino2 target [1], have you tried it?
For any kind of firmware customization I encourage you to use the
lime-sdk "cooker" [2]. Are you familiar with it?
Cheers.
[1]
Hi everyone,
I've following the list for quite some time and it was only in the
last month that I got myself together and installed LiMe in some Mesh
Potatoes (based on Dragino MS14) that I had with me. In Zenzeleni
we've been using MPs and VillageTelco firmware from the beginning, and
although they are "very Plug & Play" and easy to use for non-geeks, I
was pretty impressed by LiMe. What you have done making IP disappear
is quite something as it is one of the concepts people struggle with
the most.
So now, we are seriously considering using LiMe at Zenzeleni. However,
we need a bit of guidance on creating a built for the MP02-AWD which
is the hardware we have in our networks. It is based on the Dragino
MS14, so the internal radio works from scratch after flashing.
However, I'd like to add the secondary radio (ralink usb) to the
build, and have the wireless config files modified accordingly, so it
works directly after being flashed.
Anyone keen to guide me about how to do it?
Thanks in advance,
carlos
--
Carlos Rey-Moreno, PhD
PostDoctoral Fellow University of the Western Cape
Zenzeleni Networks:
zenzeleni.net <http://zenzeleni.net>
https://www.youtube.com/watch?v=YxTPSWMX26M
<https://www.youtube.com/watch?v=YxTPSWMX26M>
Cel: +27 (0) 76 986 3633 <tel:+27%2076%20986%203633>
Skype: carlos.reymoreno Twitter: Creym
_______________________________________________
lime-dev mailing list
lime-dev(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-dev