12 Aug
2014
12 Aug
'14
8:39 p.m.
On 12/08/14 17:22, Max Schmit wrote:
eureka, now everything is fine,
Btw, if somebody has a fix for my other issue I tried to plug an external wifi (AR9271)
because the 703n (with or without ext. antenna) has a really poor range. I got everything
installed (ath9-htc), however nothing happens on wifi detect. Any ideas? Pau said that usb
device has some issues, so maybe, I won’t be able to get it working, about 1 week
remaining for the thesis ;-)
i have to advise against using usb dongles for anything other than
client mode.
adhoc is at best unstable and hard to debug,
and while AP mode works reasonably stable, it suffers (along with adhoc
mode) from a 7-station limit inherent to the firmware design.
add to that kernel oopses on plugging and unplugging, and you'll
understand why we (or at least me) have ceased wasting time into
supporting dongles. :(
cheers!
gui
On Aug 12, 2014, at 11:51 AM, Gioacchino Mazzurco <gmazzurco89(a)gmail.com> wrote:
On Tuesday 12 August 2014 11:42:41 Max Schmit
wrote:
_______________________________________________
Dev mailing list
Dev(a)lists.libre-mesh.org
https://lists.libre-mesh.org/mailman/listinfo/dev
gioacchino’s has LiMe. I had to make firstboot,
in order to get a correct ip
address. (maybe I didn’t waited enough).
I believed you didn't waited enough, before lime-config is run there is a 90s
delay (i believe we can decrease this delay a lot, but at moment it's not a
priority :p to me ), then the device is rebooted and you got it configured
No web interface, once connected
My images doesn't include lime-webui
to telnet in order to set passwd, it refuses all
types of connection (web,
ssh, telnet). Wifi and Ethernet fine!
At first boot it is like a plain openwrt, then after 90s the router is
configured and rebooted then you get a lime working device
If you want me to make more tests, tonight could
be possible. Take in
account that I did these experiments in a hurry.
Yeah tests and feedback are always welcomed