Re: [lime-dev] Building lime for Raspberry Pi

Well.. Actually there was a first problem was not bmx but other package. I did this change and now it works: $ diff ./lime-sdk/lede/ar71xx/generic/sdk/build_dir/target- mips_24kc_musl/linux-ar71xx_generic/compat-wireless-2017-01- 31/include/linux/ath9k_platform.h \ ./lede/ar71xx/generic/sdk/build_dir/target-mips_24kc_musl/linux- ar71xx_generic/linux-4.4.74/include/linux/ath9k_platform.h  52d51 <  const char *led_name; Because it was throwing me a cmp error, I did that change and now it compiles (for ar71xx). But for  brcm2708/bcm2709 (r-pi2) I run this: J=1 V=s ./cooker -c brcm2708/bcm2709 --flavor=lime_default -- profile=rpi-2 And it says: Unknown package 'lime-full'. .... Configuring ip6tables. Configuring brcmfmac-firmware-43430-sdio. Configuring ppp-mod-pppoe. Collected errors:  * opkg_install_cmd: Cannot install package lime-full. Makefile:146: recipe for target 'package_install' failed make[2]: *** [package_install] Error 255 Makefile:109: recipe for target '_call_image' failed make[1]: *** [_call_image] Error 2 Makefile:202: recipe for target 'image' failed make: *** [image] Error 2 make: Leaving directory '/home/nicopace/projects/redlibre/altermundi/librestack/lime- sdk/lede/brcm2708/bcm2709/ib' Axel sent me a patch, but it didn't worked (https://gist.github.com/n icopace/b6ca47a0873208e14c56fa87525064cb). /bmx7-r2017011101$ patch < patch patching file hna.c Hunk #1 FAILED at 34. 1 out of 1 hunk FAILED -- saving rejects to file hna.c.rej patching file ip.c Hunk #1 FAILED at 38. 1 out of 1 hunk FAILED -- saving rejects to file ip.c.rej can't find file to patch at input line 31 Perhaps you should have used the -p or --strip option? The text leading up to this was: -------------------------- |diff --git a/lib/bmx7_tun/tun.c b/lib/bmx7_tun/tun.c |index d4834cb..f2be6b3 100644 |--- a/lib/bmx7_tun/tun.c |+++ b/lib/bmx7_tun/tun.c -------------------------- File to patch:  Skip this patch? [y]  Skipping patch. 1 out of 1 hunk ignored patching file node.h Hunk #1 FAILED at 23. 1 out of 1 hunk FAILED -- saving rejects to file node.h.rej The failing code is here: https://www.dropbox.com/s/az65kfgzvhrsy6f/b mx7-r2017011101.tgz?dl=0 Any idea? Regards, On Thu, 2017-07-06 at 12:15 +0300, Nicolas Pace wrote: > (Adding Axel cause it is a a BMX7 compilation error... sorry axel > for > sending you so many same emails) > > I'm trying to compile Libremesh for Raspberry pi 2. I had an issue > with > a diff file on ath9k (below). > And now there is a BMX7 compile error. > > $ J=1 V=s ./cooker -b brcm2708/bcm2709 --flavor=lime_default -- > profile=rpi-2 > ... > make[5]: Entering directory > './lede/brcm2708/bcm2709/sdk/build_dir/target-arm_cortex-a7+neon- > vfpv4_musl_eabi/bmx7-r2017011101' > ccache_cc  -pedantic -W -Wall -Wstrict-prototypes -Wno-unused- > parameter  > -Os -g3 -std=gnu99 > -DGIT_REV=\"589ee21b49d370056a24d8931d663626608f3c12\" > -DAVL_5XLINKED  -pedantic -W -Wall -Wstrict-prototypes -Wno-unused- > parameter -Os -g3 -std=gnu99 > -DGIT_REV=\"589ee21b49d370056a24d8931d663626608f3c12\" > -DAVL_5XLINKED  -Os -pipe -mcpu=cortex-a7 -mfpu=neon-vfpv4 -fno- > caller- > saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable > -Wno- > error=unused-result -mfloat-abi=hard > -iremap./lede/brcm2708/bcm2709/sdk/build_dir/target-arm_cortex- > a7+neon- > vfpv4_musl_eabi/bmx7-r2017011101:bmx7-r2017011101 -Wformat > -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,- > z,now -Wl,-z,relro -fpic -I. > -I./lede/brcm2708/bcm2709/sdk/staging_dir/target-arm_cortex- > a7+neon- > vfpv4_musl_eabi/usr/include -DCRYPTLIB=MBEDTLS_2_4_0 > -DCORE_LIMIT=20000 > -DTRAFFIC_DUMP -DNO_TRACE_FUNCTION_CALLS -DBMX7_LIB_IWINFO -c ip.c > -o > ip.o > In file included from > ./lede/brcm2708/bcm2709/sdk/staging_dir/toolchain-arm_cortex- > a7+neon- > vfpv4_gcc-5.4.0_musl_eabi/include/linux/if_tunnel.h:6:0, >                  from ip.c:44: > ./lede/brcm2708/bcm2709/sdk/staging_dir/toolchain-arm_cortex- > a7+neon- > vfpv4_gcc-5.4.0_musl_eabi/include/linux/ip.h:85:8: error: > redefinition > of 'struct iphdr' >  struct iphdr { >         ^ > In file included from ip.c:41:0: > ./lede/brcm2708/bcm2709/sdk/staging_dir/toolchain-arm_cortex- > a7+neon- > vfpv4_gcc-5.4.0_musl_eabi/include/netinet/ip.h:25:8: note: > originally > defined here >  struct iphdr { >         ^ > ip.c: In function 'opt_dev': > ip.c:3458:10: warning: unused variable > 'TODO_use_proc_for_getting_parent_ifname' [-Wunused-variable] >     IDM_T TODO_use_proc_for_getting_parent_ifname; >           ^ > Makefile:32: recipe for target 'ip.o' failed > make[5]: *** [ip.o] Error 1 > make[5]: Leaving directory > './lede/brcm2708/bcm2709/sdk/build_dir/target-arm_cortex-a7+neon- > vfpv4_musl_eabi/bmx7-r2017011101' > Makefile:21: recipe for target 'all' failed > make[4]: *** [all] Error 2 > make[4]: Leaving directory > './lede/brcm2708/bcm2709/sdk/build_dir/target-arm_cortex-a7+neon- > vfpv4_musl_eabi/bmx7-r2017011101' > Makefile:186: recipe for target > './lede/brcm2708/bcm2709/sdk/build_dir/target-arm_cortex-a7+neon- > vfpv4_musl_eabi/bmx7-r2017011101/.built' failed > make[3]: *** [./lede/brcm2708/bcm2709/sdk/build_dir/target- > arm_cortex- > a7+neon-vfpv4_musl_eabi/bmx7-r2017011101/.built] Error 2 > make[3]: Leaving directory './feeds/routing/bmx7' > package/Makefile:109: recipe for target > 'package/feeds/routing/bmx7/compile' failed > make[2]: *** [package/feeds/routing/bmx7/compile] Error 2 > make[2]: Leaving directory './lede/brcm2708/bcm2709/sdk' > package/Makefile:105: recipe for target > './lede/brcm2708/bcm2709/sdk/staging_dir/target-arm_cortex-a7+neon- > vfpv4_musl_eabi/stamp/.package_compile' failed > make[1]: *** [./lede/brcm2708/bcm2709/sdk/staging_dir/target- > arm_cortex-a7+neon-vfpv4_musl_eabi/stamp/.package_compile] Error 2 > make[1]: Leaving directory './lede/brcm2708/bcm2709/sdk' > ./lede/brcm2708/bcm2709/sdk/include/toplevel.mk:200: recipe for > target > 'world' failed > make: *** [world] Error 2 > make: Leaving directory './lede/brcm2708/bcm2709/sdk' > -> Error compiling SDK