16 Jan
2015
16 Jan
'15
10:24 a.m.
On Friday, January 16, 2015 01:00:55 AM Pau wrote:
While the name of the VLAN devices is now eth0-13 in
the network
It shouldn't be like that
configuration, bmx6 still uses the old format eth0_13.
It seems to affect
only ethernet interfaces.
This is the correct format as
network.protoVlanSeparator="_"
I am still trying to reproduce the bug can you send me a tarball of /etc/config
what router model are you using ?
16 Jan
16 Jan
11:26 a.m.
New subject: [lime-packages] BMX6 do not configure properly ethernet devices (#6)
On Friday, January 16, 2015 11:24:16 AM you wrote:
On Friday, January 16, 2015 01:00:55 AM Pau wrote:
I am not able to reproduce this bug on a tl-wdr3500 that have eth0 an eth1
like your device
root@LiMeNode-4ec7c1:/# ip l
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode
DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel master br-
lan state UP mode DEFAULT group default qlen 1000
link/ether 64:70:02:4e:c7:c1 brd ff:ff:ff:ff:ff:ff
3: eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state
DOWN mode DEFAULT group default qlen 1000
link/ether 64:70:02:4e:c7:c4 brd ff:ff:ff:ff:ff:ff
4: ip6tnl0: <NOARP> mtu 1452 qdisc noop state DOWN mode DEFAULT group default
link/tunnel6 :: brd ::
7: br-lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
mode DEFAULT group default
link/ether 64:70:02:4e:c7:c1 brd ff:ff:ff:ff:ff:ff
8: eth0_13@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1398 qdisc noqueue
state UP mode DEFAULT group default
link/ether 64:70:02:4e:c7:c1 brd ff:ff:ff:ff:ff:ff
9: eth0_154@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1496 qdisc noqueue
master bat0 state UP mode DEFAULT group default
link/ether 64:70:02:4e:c7:c1 brd ff:ff:ff:ff:ff:ff
10: eth1_13@eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1398 qdisc noqueue
state LOWERLAYERDOWN mode DEFAULT group default
link/ether 64:70:02:4e:c7:c4 brd ff:ff:ff:ff:ff:ff
11: eth1_154@eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1496 qdisc noqueue
state LOWERLAYERDOWN mode DEFAULT group default
link/ether 64:70:02:4e:c7:c4 brd ff:ff:ff:ff:ff:ff
12: bat0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-
lan state UNKNOWN mode DEFAULT group default
link/ether 56:44:d8:1d:2a:4b brd ff:ff:ff:ff:ff:ff
13: wlan1_adhoc: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1536 qdisc mq state UP
mode DEFAULT group default qlen 1000
link/ether 64:70:02:4e:c7:c3 brd ff:ff:ff:ff:ff:ff
14: wlan0_adhoc: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1536 qdisc mq state UP
mode DEFAULT group default qlen 1000
link/ether 64:70:02:4e:c7:c2 brd ff:ff:ff:ff:ff:ff
15: bmxmain: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1452 qdisc noqueue state
UNKNOWN mode DEFAULT group default
link/tunnel6 fd66:66:66:8:6670:2ff:fe4e:c7c1 peer
fd66:66:66:ff00:6670:2ff:fe4e:c7c1
16: wlan1_ap: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master br-
lan state UP mode DEFAULT group default qlen 1000
link/ether 66:70:02:4e:c7:c3 brd ff:ff:ff:ff:ff:ff
17: wlan0_ap: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master br-
lan state UP mode DEFAULT group default qlen 1000
link/ether 66:70:02:4e:c7:c2 brd ff:ff:ff:ff:ff:ff
18: wlan0_adhoc_13@wlan0_adhoc: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1398
qdisc noqueue state UP mode DEFAULT group default
link/ether 64:70:02:4e:c7:c2 brd ff:ff:ff:ff:ff:ff
19: wlan0_adhoc_154@wlan0_adhoc: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1532
qdisc noqueue master bat0 state UP mode DEFAULT group default
link/ether 64:70:02:4e:c7:c2 brd ff:ff:ff:ff:ff:ff
20: wlan1_adhoc_13@wlan1_adhoc: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1398
qdisc noqueue state UP mode DEFAULT group default
link/ether 64:70:02:4e:c7:c3 brd ff:ff:ff:ff:ff:ff
21: wlan1_adhoc_154@wlan1_adhoc: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1532
qdisc noqueue master bat0 state UP mode DEFAULT group default
link/ether 64:70:02:4e:c7:c3 brd ff:ff:ff:ff:ff:ff
root@LiMeNode-4ec7c1:/# batctl if
wlan0_adhoc_154: active
wlan1_adhoc_154: active
eth0_154: active
root@LiMeNode-4ec7c1:/# bmx6 -c show interfaces
interfaces:
devName state type rateMin rateMax llocalIp
globalIp primary
eth0_13 UP ethernet 1000M 1000M fe80::6670:2ff:fe4e:c7c1/64
fd66:66:66:8:6670:2ff:fe4e:c7c1/64 1
eth1_13 DOWN INACTIVE INVALID INVALID /-1 /-1
0
wlan0_adhoc_13 UP ethernet 1000M 1000M fe80::6670:2ff:fe4e:c7c2/64
fd66:66:66:12:6670:2ff:fe4e:c7c2/64 0
wlan1_adhoc_13 UP ethernet 1000M 1000M fe80::6670:2ff:fe4e:c7c3/64
fd66:66:66:14:6670:2ff:fe4e:c7c3/64 0
While the name of the VLAN devices is now eth0-13
in the network
It shouldn't be like that
configuration, bmx6 still uses the old format
eth0_13. It seems to affect
only ethernet interfaces.
This is the correct format as
network.protoVlanSeparator="_"
I am still trying to reproduce the bug can you send me a tarball of
/etc/config what router model are you using ?
3627
days inactive
3627
days old
1 comments
1 participants
participants (1)
-
Gioacchino Mazzurco