2 Oct
2014
2 Oct
'14
11:09 a.m.
Hi, is there a way to configure dhcp static leases in libre-mesh firmware?
Which is the right dnsmasq setup?
Thanks
LP
--
luca.postregna.name
twitter.com/lucapost
2 Oct
2 Oct
4:46 p.m.
The dhcp lease file is synchronized in all nodes to make the L2 roaming
possible. So a static DHCP lease must be configured in all the mesh
nodes to make it truly static. However if the server/computer is not
moving and it is always attached to the same LiMe node, you can set up a
static DHCP lease in the node. You can do that from the LUCI web
interface if you have the packet "lime-webui", if not you can do it
manually using UCI http://wiki.openwrt.org/doc/uci/dhcp
On 02/10/14 13:09, Luca Postregna wrote:
Hi, is there a way to configure dhcp static leases in
libre-mesh firmware?
Which is the right dnsmasq setup?
Thanks
LP
_______________________________________________
Dev mailing list
Dev(a)lists.libre-mesh.org
https://lists.libre-mesh.org/mailman/listinfo/dev
--
./p4u
9:23 p.m.
Wait. Isn't it just a big wireless switch? Wouldn't you run dhcp on a single
system and requests would just get passed through the mesh to it?
On October 2, 2014 11:46:00 AM CDT, Pau <pau(a)dabax.net> wrote:
The dhcp lease file is synchronized in all nodes to
make the L2 roaming
possible. So a static DHCP lease must be configured in all the mesh
nodes to make it truly static. However if the server/computer is not
moving and it is always attached to the same LiMe node, you can set up
a
static DHCP lease in the node. You can do that from the LUCI web
interface if you have the packet "lime-webui", if not you can do it
manually using UCI http://wiki.openwrt.org/doc/uci/dhcp
On 02/10/14 13:09, Luca Postregna wrote:
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
Hi, is there a way to configure dhcp static
leases in libre-mesh
firmware?
Which is the right dnsmasq setup?
Thanks
LP
_______________________________________________
Dev mailing list
Dev(a)lists.libre-mesh.org
https://lists.libre-mesh.org/mailman/listinfo/dev
--
./p4u
------------------------------------------------------------------------
_______________________________________________
Dev mailing list
Dev(a)lists.libre-mesh.org
https://lists.libre-mesh.org/mailman/listinfo/dev
11:09 p.m.
The network is a switch (if it is the same layer 2 cloud), but each node
has its own DHCP server and its own default gateway route (which is
selected by bmx6).
Check our architecture to understand the details:
http://libre-mesh.org/projects/libre-mesh/wiki/Network_Architecture
On 02/10/14 23:23, Charles N Wyble wrote:
Wait. Isn't it just a big wireless switch?
Wouldn't you run dhcp on a single system and requests would just get passed through
the mesh to it?
On October 2, 2014 11:46:00 AM CDT, Pau <pau(a)dabax.net> wrote:
--
./p4u
The dhcp lease file is synchronized in all nodes
to make the L2 roaming
possible. So a static DHCP lease must be configured in all the mesh
nodes to make it truly static. However if the server/computer is not
moving and it is always attached to the same LiMe node, you can set up
a
static DHCP lease in the node. You can do that from the LUCI web
interface if you have the packet "lime-webui", if not you can do it
manually using UCI http://wiki.openwrt.org/doc/uci/dhcp
On 02/10/14 13:09, Luca Postregna wrote:
Hi, is there a way to configure dhcp static
leases in libre-mesh
firmware?
Which is the right dnsmasq setup?
Thanks
LP
_______________________________________________
Dev mailing list
Dev(a)lists.libre-mesh.org
https://lists.libre-mesh.org/mailman/listinfo/dev
--
./p4u
------------------------------------------------------------------------
_______________________________________________
Dev mailing list
Dev(a)lists.libre-mesh.org
https://lists.libre-mesh.org/mailman/listinfo/dev
3733
days inactive
3733
days old
3 comments
3 participants
participants (3)
-
Charles N Wyble -
Luca Postregna -
Pau