1 Feb
2017
1 Feb
'17
12:45 a.m.
Hi from Barcelona Hacklab.
In order to mount new nodes with Libremesh in places where exist
networks with qMp and Libremesh we tested with two Nanostation M5 with
same revision of BMX6:
BMX6-0.1-alpha comPatibility=16
revision=2a87b770d3f9c254e3927dc159e2f425f2e0e83a
this is the default BMX6 in each stable release (Libremesh stable and
qMp Clereance 3.2.1)
For replicate the issue:
Working on same test channel (48) with same VLAN (default qMp 12) we got
good link and we can see BMX6 routes from each other, but we can't ping
each other.
Any ideas?
Thanks!
1 Feb
1 Feb
12:55 a.m.
On 01/02/17 01:45, al wrote:
Hi from Barcelona Hacklab.
In order to mount new nodes with Libremesh in places where exist
networks with qMp and Libremesh we tested with two Nanostation M5 with
same revision of BMX6:
BMX6-0.1-alpha comPatibility=16
revision=2a87b770d3f9c254e3927dc159e2f425f2e0e83a
this is the default BMX6 in each stable release (Libremesh stable and
qMp Clereance 3.2.1)
For replicate the issue:
Working on same test channel (48) with same VLAN (default qMp 12) we got
good link and we can see BMX6 routes from each other, but we can't ping
each other.
Any ideas?
Thanks!
Configuration in Libremesh node:
config lime 'system'
option hostname 'LiMeNode-%M4%M5%M6'
config lime 'network'
list protocols 'adhoc'
list protocols 'anygw'
list protocols 'batadv:%N1'
list protocols 'bmx6:12:8021q'
config lime 'wifi'
option htmode_5ghz 'HT40-'
option channel_5ghz '48'
option adhoc_bssid '02:ca:ff:ee:ba:be'
list modes 'ap'
list modes 'adhoc'
config net 'lm_eth0'
option autogenerated 'false'
list protocols 'batadv:%N1'
list protocols 'bmx6:13'
list protocols 'lan'
option linux_name 'eth0'
config net 'lm_hwd_openwrt_wan'
option autogenerated 'false'
list protocols 'batadv:%N1'
list protocols 'bmx6:13'
list protocols 'wan'
option linux_name 'eth1'
1:26 a.m.
Can you ping the ipv6? (bmx6 -c originators).
If so, probably is a missing tunnels configuration. Do you have the route on the node? (ip
r get 10.x.y.z)
On 31 de gener de 2017 21:45:11 GMT-03:00, al <al(a)blogmail.cc> wrote:
Hi from Barcelona Hacklab.
In order to mount new nodes with Libremesh in places where exist
networks with qMp and Libremesh we tested with two Nanostation M5 with
same revision of BMX6:
BMX6-0.1-alpha comPatibility=16
revision=2a87b770d3f9c254e3927dc159e2f425f2e0e83a
this is the default BMX6 in each stable release (Libremesh stable and
qMp Clereance 3.2.1)
For replicate the issue:
Working on same test channel (48) with same VLAN (default qMp 12) we
got
good link and we can see BMX6 routes from each other, but we can't ping
each other.
Any ideas?
Thanks!
_______________________________________________
lime-dev mailing list
lime-dev(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-dev
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
9:24 a.m.
On 01/02/17 02:26, Pau wrote:
Can you ping the ipv6? (bmx6 -c originators).
Yes.
If so, probably is a missing tunnels configuration. Do you have the route on the node?
(ip r get 10.x.y.z)
Yes, as I said we have the routes.
How could we fix the missing tunnels?
On 31 de gener de 2017 21:45:11 GMT-03:00, al <al(a)blogmail.cc> wrote:
Hi from Barcelona Hacklab.
In order to mount new nodes with Libremesh in places where exist
networks with qMp and Libremesh we tested with two Nanostation M5 with
same revision of BMX6:
BMX6-0.1-alpha comPatibility=16
revision=2a87b770d3f9c254e3927dc159e2f425f2e0e83a
this is the default BMX6 in each stable release (Libremesh stable and
qMp Clereance 3.2.1)
For replicate the issue:
Working on same test channel (48) with same VLAN (default qMp 12) we
got
good link and we can see BMX6 routes from each other, but we can't ping
each other.
Any ideas?
Thanks!
_______________________________________________
lime-dev mailing list
lime-dev(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-dev
4:46 p.m.
If you have the proper router on both nodes then it is not a tunnel
problem, bmx6 is doing its job. Maybe some firewall rules? Can you check
with tcpdump if the packets are arriving and from which IP?
On 01/02/17 10:24, al wrote:
On 01/02/17 02:26, Pau wrote:
--
./p4u
Can you ping the ipv6? (bmx6 -c originators).
Yes.
If so, probably is a missing tunnels configuration. Do you have the route on the node?
(ip r get 10.x.y.z)
Yes, as I said we have the routes.
How could we fix the missing tunnels?
On 31 de gener de 2017 21:45:11 GMT-03:00, al <al(a)blogmail.cc> wrote:
Hi from Barcelona Hacklab.
In order to mount new nodes with Libremesh in places where exist
networks with qMp and Libremesh we tested with two Nanostation M5 with
same revision of BMX6:
BMX6-0.1-alpha comPatibility=16
revision=2a87b770d3f9c254e3927dc159e2f425f2e0e83a
this is the default BMX6 in each stable release (Libremesh stable and
qMp Clereance 3.2.1)
For replicate the issue:
Working on same test channel (48) with same VLAN (default qMp 12) we
got
good link and we can see BMX6 routes from each other, but we can't ping
each other.
Any ideas?
Thanks!
_______________________________________________
lime-dev mailing list
lime-dev(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-dev
14 Feb
14 Feb
9:30 p.m.
On 01/02/17 10:24, al wrote:
On 01/02/17 02:26, Pau wrote:
Sooo, some idea?
Can you ping the ipv6? (bmx6 -c originators).
Yes.
If so, probably is a missing tunnels configuration. Do you have the route on the node?
(ip r get 10.x.y.z)
Yes, as I said we have the routes.
How could we fix the missing tunnels?
On 31 de gener de 2017 21:45:11 GMT-03:00, al <al(a)blogmail.cc> wrote:
Hi from Barcelona Hacklab.
In order to mount new nodes with Libremesh in places where exist
networks with qMp and Libremesh we tested with two Nanostation M5 with
same revision of BMX6:
BMX6-0.1-alpha comPatibility=16
revision=2a87b770d3f9c254e3927dc159e2f425f2e0e83a
this is the default BMX6 in each stable release (Libremesh stable and
qMp Clereance 3.2.1)
For replicate the issue:
Working on same test channel (48) with same VLAN (default qMp 12) we
got
good link and we can see BMX6 routes from each other, but we can't ping
each other.
Any ideas?
Thanks!
_______________________________________________
lime-dev mailing list
lime-dev(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-dev
11 p.m.
I can take a look but I need access. If you manage to do a ssh reverse tunnel or something
like this, I'll check it.
On 14 de febrer de 2017 18:30:37 GMT-03:00, al <al(a)blogmail.cc> wrote:
On 01/02/17 10:24, al wrote:
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
On 01/02/17 02:26, Pau wrote:
route on
the node? (ip r get 10.x.y.z)
Can you ping the ipv6? (bmx6 -c originators).
Yes.
>
> If so, probably is a missing tunnels configuration. Do you have the
Yes, as I said we have the routes.
How could we fix the missing tunnels?
Sooo, some idea?
>
> On 31 de gener de 2017 21:45:11 GMT-03:00, al <al(a)blogmail.cc>
wrote:
>> Hi from Barcelona Hacklab.
>>
>> In order to mount new nodes with Libremesh in places where exist
>> networks with qMp and Libremesh we tested with two Nanostation M5
with
>> same revision of BMX6:
>>
>> BMX6-0.1-alpha comPatibility=16
>> revision=2a87b770d3f9c254e3927dc159e2f425f2e0e83a
>>
>> this is the default BMX6 in each stable release (Libremesh stable
and
>> qMp Clereance 3.2.1)
>>
>> For replicate the issue:
>>
>> Working on same test channel (48) with same VLAN (default qMp 12)
we
>> got
>> good link and we can see BMX6 routes from each other, but we can't
ping
>>> each other.
>>>
>>> Any ideas?
>>>
>>> Thanks!
>>> _______________________________________________
>>> lime-dev mailing list
>>> lime-dev(a)lists.libremesh.org
>>> https://lists.libremesh.org/mailman/listinfo/lime-dev
>>
>
5 Mar
5 Mar
4:38 p.m.
----- Mensaje original -----
De: "Pau" <pau(a)dabax.net>
Para: "al" <al(a)blogmail.cc>cc>, "libremesh development"
<lime-dev(a)lists.libremesh.org>rg>, qmp-dev(a)mail.qmp.cat
Enviados: Miércoles, 15 de Febrero 2017 0:00:17
Asunto: Re: [lime-dev] Libremesh & qMp don't ping with same BMX6
revision
I can take a look but I need access. If you manage to
do a ssh
reverse tunnel or something like this, I'll check it.
What do you need exactly?
I can offer you now an access to a qMp working node.
We have not working now a Libremesh node connected to the qMp one. Do you need this
scenario? If yes I can try to mount it again just for you.
7 Mar
7 Mar
3:08 p.m.
----- Mensaje original -----
De: "Pau" <pau(a)dabax.net>
Para: "al" <al(a)blogmail.cc>cc>, "libremesh development"
<lime-dev(a)lists.libremesh.org>rg>, qmp-dev(a)mail.qmp.cat
Enviados: Miércoles, 15 de Febrero 2017 0:00:17
Asunto: Re: [lime-dev] Libremesh & qMp don't ping with same BMX6
revision
I can take a look but I need access. If you manage to
do a ssh
reverse tunnel or something like this, I'll check it.
What do you need exactly?
I can offer you now an access to a qMp working node.
We have not working now a Libremesh node connected to the qMp one. Do
you need this scenario? If yes I can try to mount it again just for you.
2605
days inactive
2639
days old
8 comments
2 participants
participants (2)
-
al -
Pau