1 Aug
2014
1 Aug
'14
1:43 p.m.
Hi everyone,
I’ve some problems to set up the 1043nd using the pre-compiled images of pau. For the two
703n, they are working out of the box.
I’m not able to get a ip address over ethernet, also joining the lime SSID is buggy
(shortly after obtaining an IP address, mac os is reporting that there are some issues,
well could be also a strange osx behaviour…).
I managed to get a access to web gui over wifi. The mesh is working. I tried to compare
the different configs (703n and 1043nd). They are more or less the same. As Pau recalled
me, often the switch section is difficult to get working.
So: WAN got an ip address from my local network an Port 2 (connected to my computer) is
for vlan id 1 : untagged / vlan 2 id 2 : off. I’ve no idea what’s wrong, my technical
background for this is limited.
Btw, currently I’m working on my bachelor thesis (UAV communications) and so libremesh
fits perfect for my use.
Thank you,
max
On Aug 1, 2014, at 2:00 PM, dev-request(a)lists.libre-mesh.org wrote:
Send Dev mailing list submissions to
dev(a)lists.libre-mesh.org
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.libre-mesh.org/mailman/listinfo/dev
or, via email, send a message with subject or body 'help' to
dev-request(a)lists.libre-mesh.org
You can reach the person managing the list at
dev-owner(a)lists.libre-mesh.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Dev digest..."
Asuntos del día:
1. downloads.libre-mesh.org (Pau)
----------------------------------------------------------------------
Message: 1
Date: Fri, 01 Aug 2014 13:45:00 +0200
From: Pau <pau(a)dabax.net>
To: libre-mesh <dev(a)lists.libre-mesh.org>
Subject: [lime-dev] downloads.libre-mesh.org
Message-ID: <53DB7DBC.2090102(a)dabax.net>
Content-Type: text/plain; charset="iso-8859-1"
Hi.
Yesterday I set up a server with generic pre-compiled images for
LibreMesh. Find it here: http://downloads.libre-mesh.org/
ToDo: Set up the nightly compile, so we will have fresh compiled images
every night if there is some change in the code
--
./p4u
------------ próxima parte ------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: OpenPGP digital signature
URL:
<http://lists.libre-mesh.org/pipermail/dev/attachments/20140801/d36a0d3d/attachment-0001.pgp>
------------------------------
_______________________________________________
Dev mailing list
Dev(a)lists.libre-mesh.org
https://lists.libre-mesh.org/mailman/listinfo/dev
Fin de Resumen de Dev, Vol 16, Envío 1
**************************************
2 Aug
2 Aug
10:34 a.m.
You may try to change the VLAN tag from 1 to 3 for instance. I found in
some switch that VLAN 1 is not welcome.
Another option is to edit /etc/config/network and remove everything
related with the switch. Then you can use eth0 as a single ethernet
port.
El vie 01 ago 2014 15:43:01 CEST, Max Schmit escribió:
Hi everyone,
I’ve some problems to set up the 1043nd using the pre-compiled images of pau. For the two
703n, they are working out of the box.
I’m not able to get a ip address over ethernet, also joining the lime SSID is buggy
(shortly after obtaining an IP address, mac os is reporting that there are some issues,
well could be also a strange osx behaviour…).
I managed to get a access to web gui over wifi. The mesh is working. I tried to compare
the different configs (703n and 1043nd). They are more or less the same. As Pau recalled
me, often the switch section is difficult to get working.
So: WAN got an ip address from my local network an Port 2 (connected to my computer) is
for vlan id 1 : untagged / vlan 2 id 2 : off. I’ve no idea what’s wrong, my technical
background for this is limited.
Btw, currently I’m working on my bachelor thesis (UAV communications) and so libremesh
fits perfect for my use.
Thank you,
max
On Aug 1, 2014, at 2:00 PM, dev-request(a)lists.libre-mesh.org wrote:
--
./p4u
Send Dev mailing list submissions to
dev(a)lists.libre-mesh.org
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.libre-mesh.org/mailman/listinfo/dev
or, via email, send a message with subject or body 'help' to
dev-request(a)lists.libre-mesh.org
You can reach the person managing the list at
dev-owner(a)lists.libre-mesh.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Dev digest..."
Asuntos del día:
1. downloads.libre-mesh.org (Pau)
----------------------------------------------------------------------
Message: 1
Date: Fri, 01 Aug 2014 13:45:00 +0200
From: Pau <pau(a)dabax.net>
To: libre-mesh <dev(a)lists.libre-mesh.org>
Subject: [lime-dev] downloads.libre-mesh.org
Message-ID: <53DB7DBC.2090102(a)dabax.net>
Content-Type: text/plain; charset="iso-8859-1"
Hi.
Yesterday I set up a server with generic pre-compiled images for
LibreMesh. Find it here: http://downloads.libre-mesh.org/
ToDo: Set up the nightly compile, so we will have fresh compiled images
every night if there is some change in the code
--
./p4u
------------ próxima parte ------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: OpenPGP digital signature
URL:
<http://lists.libre-mesh.org/pipermail/dev/attachments/20140801/d36a0d3d/attachment-0001.pgp>
------------------------------
_______________________________________________
Dev mailing list
Dev(a)lists.libre-mesh.org
https://lists.libre-mesh.org/mailman/listinfo/dev
Fin de Resumen de Dev, Vol 16, Envío 1
**************************************
_______________________________________________
Dev mailing list
Dev(a)lists.libre-mesh.org
https://lists.libre-mesh.org/mailman/listinfo/dev
2:37 p.m.
first solution, changing the vlan didn’t succeed
removing all the switch related lines, only perfect!
danke
On Aug 2, 2014, at 12:34 PM, Pau <pau(a)dabax.net> wrote:
You may try to change the VLAN tag from 1 to 3 for
instance. I found in
some switch that VLAN 1 is not welcome.
Another option is to edit /etc/config/network and remove everything
related with the switch. Then you can use eth0 as a single ethernet
port.
El vie 01 ago 2014 15:43:01 CEST, Max Schmit escribió:
Hi everyone,
I’ve some problems to set up the 1043nd using the pre-compiled images of pau. For the two
703n, they are working out of the box.
I’m not able to get a ip address over ethernet, also joining the lime SSID is buggy
(shortly after obtaining an IP address, mac os is reporting that there are some issues,
well could be also a strange osx behaviour…).
I managed to get a access to web gui over wifi. The mesh is working. I tried to compare
the different configs (703n and 1043nd). They are more or less the same. As Pau recalled
me, often the switch section is difficult to get working.
So: WAN got an ip address from my local network an Port 2 (connected to my computer) is
for vlan id 1 : untagged / vlan 2 id 2 : off. I’ve no idea what’s wrong, my technical
background for this is limited.
Btw, currently I’m working on my bachelor thesis (UAV communications) and so libremesh
fits perfect for my use.
Thank you,
max
On Aug 1, 2014, at 2:00 PM, dev-request(a)lists.libre-mesh.org wrote:
--
./p4u
Send Dev mailing list submissions to
dev(a)lists.libre-mesh.org
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.libre-mesh.org/mailman/listinfo/dev
or, via email, send a message with subject or body 'help' to
dev-request(a)lists.libre-mesh.org
You can reach the person managing the list at
dev-owner(a)lists.libre-mesh.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Dev digest..."
Asuntos del día:
1. downloads.libre-mesh.org (Pau)
----------------------------------------------------------------------
Message: 1
Date: Fri, 01 Aug 2014 13:45:00 +0200
From: Pau <pau(a)dabax.net>
To: libre-mesh <dev(a)lists.libre-mesh.org>
Subject: [lime-dev] downloads.libre-mesh.org
Message-ID: <53DB7DBC.2090102(a)dabax.net>
Content-Type: text/plain; charset="iso-8859-1"
Hi.
Yesterday I set up a server with generic pre-compiled images for
LibreMesh. Find it here: http://downloads.libre-mesh.org/
ToDo: Set up the nightly compile, so we will have fresh compiled images
every night if there is some change in the code
--
./p4u
------------ próxima parte ------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: OpenPGP digital signature
URL:
<http://lists.libre-mesh.org/pipermail/dev/attachments/20140801/d36a0d3d/attachment-0001.pgp>
------------------------------
_______________________________________________
Dev mailing list
Dev(a)lists.libre-mesh.org
https://lists.libre-mesh.org/mailman/listinfo/dev
Fin de Resumen de Dev, Vol 16, Envío 1
**************************************
_______________________________________________
Dev mailing list
Dev(a)lists.libre-mesh.org
https://lists.libre-mesh.org/mailman/listinfo/dev
4108
days inactive
4109
days old
2 comments
2 participants
participants (2)
-
Max Schmit -
Pau