On 07/06/2016 04:40 AM, aad wrote:
Marvin Arnold <marvin(a)unplugged.im>im>:
FYI, we'll be meeting for the last time
tomorrow (Wed) night before
breaking for a few weeks. Would be cool to get some more direction.
is the meeting
on irc? i will try to be there
We are meeting in person in New Orleans from 6.30pm - 8.30pm tonight
(UTC-5). If you are in IRC then that would be awesome, thanks.
Most important is that we're still not clear
how to get internet access
on the mesh. We don't have ethernet internet access where we are
but internet is available over wifi.
liMe shares internet connection when you use
the auto-gw modules (i.e. bmx6-auto-gw-mode, batman-adv-auto-gw-mode),
you should also manually configure your liMe box to connect to your wifi internet, using
'wan' as the uci interface name
or you can use a non-liMe box which connects to the internet wifi and bridges it to the
ethernet, then you connect ethernet to the liMe wan eth port.
if you go this way, you should add the lime-hwd-openwrt-wan module.
Thanks for the details, will give it a try.
users mailing list