23 Nov
2017
23 Nov
'17
8:55 a.m.
hi Fred
Sounds like a fantastic plan. I don 't have proper documentation. But the
CPE's are running fine. We used them in two other networks with good
results.
Let me know if you need any information regarding configuration or anything.
Best,
Bruno
On Tue, Nov 21, 2017 at 9:00 AM, fred <support(a)qo-op.com> wrote:
Hello,
I read about your experimentation. What results do you have now.
Have you made documentation about installation?
I could use your data to build a mesh network in Dominica (after
Hurricane devastation)
Thanks
Fred
http://madeinzion.org
Le 15/07/2017 à 19:34, bruno vianna a écrit :
were
libremesh.org>
--
bruno(a)pobox.com ▀─█▄██▄▀▄
http://brunovianna.net ─█▄██▄▀█▀█▄
skype: randomico▀─█▄██▄▀█▀█▄▌██─█▌█▌
all credits to the chef cook!
i'm preparing the documentation about the installation, will post here
when it's done. but basically we got a grant from the state of rio to do
a free networks workshop in the favela, which would of course end up in
a functioning network. we got a link from the federal university nearby,
which was a great push.
we needed the gain, so there was no advantage to use another antenna.
but i just saw the omnidirectional hack on the openwrt wiki, seems neat.
we actually need to find a way of making a DIY directional antenna like
the altermundi model. we never found a metalsmith who could replicate it
here.
b
On Thu, Jul 13, 2017 at 8:22 PM, Nicolas Pace <nico(a)libre.ws
<mailto:nico@libre.ws>> wrote:
Great Bruno!
That sounds Amazing!
Please, if you have any time tell us more about your deployment!.
On Thu, 2017-07-13 at 18:27 -0300, bruno vianna wrote:
> The reason I'm flashing these is that we installed a small network
in
a favela
here last week, and
> the wdr3500 didn't have enough reach. Not only the nearest nods far
(anything from 200m to 2km), but also all the interference we
had (it's a really dense neighborhood) made any link with more than
100m very poor. The plan now is to connect the most important nodes
with those.
Are you using the antenna that comes from factory, or using a custom
made one?
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org <mailto:lime-users@lists.
https://lists.libremesh.org/mailman/listinfo/lime-users
<https://lists.libremesh.org/mailman/listinfo/lime-users>
--
bruno(a)pobox.com <mailto:bruno@pobox.com> ▀─█▄██▄▀▄
http://brunovianna.net <http://brunovianna.net/> ─█▄██▄▀█▀█▄
skype: randomico▀─█▄██▄▀█▀█▄▌██─█▌█▌
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users