1 Jun
2015
1 Jun
'15
9:54 p.m.
hello libremesh team.
I've been following this thread and reading some comments. If the downloads from
libre-mesh server are broken because they are development builds, an image compiled
following this proccess
http://dev.libre-mesh.org/projects/libre-mesh/wiki/Compile_Manually will be broken too ?
thanks in advance.
From: iochesonome(a)gmail.com
Date: Sun, 31 May 2015 14:02:12 +0200
To: users(a)lists.libre-mesh.org
Subject: Re: [lime-users] LiMe broken. (was Re: New mesh network in Oaxaca)
2015-05-31 12:44 GMT+02:00 Gio <gio(a)diveni.re>re>:
On Tuesday, May 26, 2015 10:47:44 AM Ilario
wrote:
Oops, sorry for my wrong answer.
Yep, lime-defaults is ignored by lime-config
Wrong! /etc/config/lime-defaults is not ignored, it is
used often more than
/etc/config/lime, the difference is that lime-defaults is not supposed to be
edited by the user while /etc/config/lime is supposed to be edited by the user,
and that if a configuration is present both on lime and lime-defaults the one
in /etc/config/lime is preferred as it is supposed to be set by the user
Thanks, now it's quite clear.
I can't find any documentation about LiMe configuration (apart the
very basic one that I wrote in Italian [1] where there's also
explained that configuration from lime-defaults is always applied,
LOL! There is also another document in Italian written by NinuxBO
[2]).
I think it's time to have such a documentation, so I started a new
wiki page about configuration on libre-mesh website [3], you're
invited to contribute :D
Ciao!
Ilario
[1] http://wiki.ninux.org/Libre-Mesh#Configurazione
[2] https://wiki.bologna.ninux.org/mediawiki/index.php/CompilareDaOpenWrt
[3] https://libre-mesh.org/projects/libre-mesh/wiki/Configuration
_______________________________________________
users mailing list
users(a)lists.libre-mesh.org
https://lists.libre-mesh.org/mailman/listinfo/users