Re: [lime-users] Meshnodes get any ipv4 addresses

Hi SAn, you are right. babeld is not started. I hav to start it manually in /etc/init.d with ./babeld trace then I get an IP address. This is strangely *not *working in the LuCI-Interface -> startup: with restart or start/stop (no output in logread) with the manual method above I get following: Mon Nov 9 09:33:55 2020 daemon.warn procd: Seccomp support for babeld::instance1 not available

Mon Nov 9 09:33:55 2020 daemon.err babeld[4253]: Warning: couldn't determine channel of interface wlan0-mesh_17. Mon Nov 9 09:33:55 2020 daemon.err babeld[4253]: Warning: couldn't determine channel of interface eth0_17. Mon Nov 9 09:34:00 2020 cron.err crond[1330]: USER root pid 4288 cmd ((sleep $(($RANDOM % 30)); /etc/shared-state/publishers/shared-state-publish_vouchers && shared-state sync pirania &> /dev/null)&) Mon Nov 9 09:34:00 2020 cron.err crond[1330]: USER root pid 4289 cmd ((for dataFile in /var/shared-state/data/* ; do shared-state bleach $(basename $dataFile .json); done &> /dev/null)&) And every reboot no babeld :-( A Problem of the openwrt snapshot maybe? (Build is from today)

Regards Andy Am So., 8. Nov. 2020 um 01:48 Uhr schrieb SAn &lt;spiccinini(a)altermundi.net&gt;et>: > Hi Andy, it seems that babeld Is not running or not working properly. > Check that it is running in all the nodes. > > Best > SAn > > On November 6, 2020 10:38:25 AM GMT-03:00, Andy Schopf < > andymcschopf(a)gmail.com&gt; wrote: > >Hi all, > > > >I have since a few days the Problem, that my mesh nodes get any ipv4 > >addresses. > >So connected to the mesh node there is no way to the internet. Only on > >the > >Gateway Nodes. There I see only ipv6 addresses in direction to the mesh > >nodes. on the nodes the lime app shows no DNS and no ipv4/ipv6. > >Any suggestions? > > > >Regards, > >Andy >

_______________________________________________ lime-users mailing list lime-users(a)lists.libremesh.org https://lists.libremesh.org/mailman/listinfo/lime-users