29 Jul
2018
29 Jul
'18
1:07 a.m.
Check this https://github.com/libremesh/network-profiles/issues/12
highlights:
- bmx6 in vlan12 with 8021q mode [1]
- plus bssid is this one [2]
[1]
https://github.com/MoinhoDigital/network-profiles/blob/master/qmp/v1/etc/co…
[2]
https://github.com/MoinhoDigital/network-profiles/blob/master/qmp/v1/etc/co…
On Sat, Jul 28, 2018 at 8:15 PM, Paul Spooren <mail(a)aparcar.org> wrote:
For details, check the network-profile [0], basically
it just sets BMX6
to a specific channel and uses the 8021q mode, while LibreMesh uses
something else, which I forgot...
[0]:
https://github.com/MoinhoDigital/network-profiles/blob/master/qmp/v1/etc/co…
On 2018-07-29 02:44, Juergen Kimmel wrote:
What makes the network profile qmp-v1 unique to
mesh with Qmp?
guifipedro <guifipedro(a)gmail.com <mailto:guifipedro@gmail.com>>
schrieb am Sa., 28. Juli 2018, 19:19:
Yes, it works with qMp. I tested it. But qMp allows you to use all
wireless
channels and libremesh (at least in chef.libremesh.org
<http://chef.libremesh.org>), no. So you
would need to adapt your mesh network to the few legal channels or
build your own firmware/libremesh
On Sat, Jul 28, 2018 at 3:22 PM, Juergen Kimmel
<juergenkimmel(a)gmail.com <mailto:juergenkimmel@gmail.com>> wrote:
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users Libremesh cooker offers a network profile
"qmp-V1"
Does this mean this profile meshes with qmp nodes?
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
<mailto:lime-users@lists.libremesh.org>
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org <mailto:lime-users@lists.libremesh.org>
https://lists.libremesh.org/mailman/listinfo/lime-users
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users