2 Nov
2017
2 Nov
'17
10:12 a.m.
On 01/11/17 19:18, Carlito Nueno wrote:
Awesome. Yes, I am not using LiMe as gateway at all.
My gateway/router
is separate.
I disabled anygw and bmx6, and am just using batadv. It's working.
So, will I still have roaming? (this was the feature of anygw)
Yes if there is a single DHCP/GW server on your network and the SSID is
the same for all the LiMe nodes.
I tried walking around with an iPhone between mesh
nodes. When I
looked at the global translation table or local translation table, I
do NOT see an R under flags. I only see W.
Thanks
On Wed, Nov 1, 2017 at 2:48 AM, pau <pau(a)dabax.net> wrote:
On 01/11/17 01:43, Carlito Nueno wrote:
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users Hi all,
I am using libremesh on my APs but I made all of them dump APs, that
is, I disabled the dhcp server.
I have two APs: A, B, C
A is the exit node. A is connected to a router via ethernet and
receives dhcp from this router.
B and C are meshed to A but receive dhcp via router.
Now, when libremesh node is not serving dhcp, what is the purpose of
anygw interface?
Can I remove it?
Thanks!
Sure, you can disable anygw. The great thing of LiMe is that it is very
modular so you can make the setup you like for your environment.
If you are not using LiMe as gateway at all you can also disable bmx6
and use only batadv.
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users