19 Sep
2018
19 Sep
'18
2:39 p.m.
I managed to get libremesh branch openwrt-18.06 running on an espressobin
https://openwrt.org/toh/hwdata/globalscale/globalscale_espressobin_v5_0_1
It uses the following switch (Marvell Topaz 88E6341). The espressobin
exposes 3 ports (2 for lan and 1 for wan)
http://wiki.espressobin.net/tiki-index.php?page=Topaz+Switch
Which has been supported using MDIO since 18.06
https://openwrt.org/toh/views/toh_admin_vlan?dataflt%5B0%5D=switch_%3DMarve…
But I'm struggling with the right /etc/config/lime for this specific switch
When the system boots it has the following devices off of eth0
lan0
lan1
wan
config lime 'system'
option domain 'lan'
option hostname 'TEST-%M4%M5%M6'
config lime 'network'
list protocols 'ieee80211s'
list protocols 'lan'
list protocols 'anygw'
list protocols 'bmx6:13'
list resolvers '4.2.2.2'
list resolvers '141.1.1.1'
list resolvers '2001:470:20::2'
option primary_interface 'eth0'
option main_ipv4_address '10.%N1.0.0/16'
option main_ipv6_address '2a00:1508:0a%N1:%N200::/64'
option anygw_mac 'aa:aa:aa:%N1:%N2:aa'
option anygw_dhcp_start '2'
option anygw_dhcp_limit '0'
option bmx6_over_batman 'false'
option bmx6_mtu '1500'
option bmx6_pref_gw 'none'
option use_odhcpd 'false'
option bmx6_publish_ownip 'false'
option bmx6_wifi_rate_max '54000000'
config lime 'wifi'
list modes 'ap'
list modes 'apname'
list modes 'ieee80211s'
option ieee80211s_mesh_id 'LiMe'
option adhoc_mcast_rate_5ghz '6000'
option ap_ssid 'test'
option distance '1000'
option ieee80211s_mesh_fwding '0'
option apname_ssid 'test/%H'
option adhoc_bssid 'ca:fe:00:c0:ff:ee'
option htmode_5ghz 'HT20'
option channel_2ghz '11'
option adhoc_mcast_rate_2ghz '24000'
option channel_5ghz '48'
option adhoc_ssid 'LiMe'
option distance_2ghz '100'
option distance_5ghz '1000'
config net 'lm_hwd_openwrt_wan'
option autogenerated 'false'
list protocols 'ieee80211s'
list protocols 'anygw'
list protocols 'bmx6:0'
list protocols 'wan'
option linux_name 'wan