[lime-users] Still issues with Librenet6

Hello Libremesh folks. I am having still numerous issues running a perfect and clean librenet6 tunnel. My setup is as follows. 1. My /64 range is delivered to my routers and laptops through a modest ubuntu 14.04 machine, with tinc and radvd basically. Then the issues i am facing are: 1. If i configure tinc in a client machine, for example a Ubuntu laptop client to get ipv6 on it, it receives sometimes ipv6 address, some others doesnt. You have to restart tinc on the client several times to get an address, and the address is not on my assigned /64 range but in the f000/64 range. I have the same problem in several linux flavors and machines, connected from different ISP's 2. I can set up tinc in a router, say a wdr3600, but the address acquired from the 2a00:1508:a00:0000::/40 global range overrides my own /64 librenet6 range on the device, and i cannot specify on the router a fixed ipv6 address inside my range, ie 2a00:1508:1:f024::4 3. The only way to have the librenet6 tunnel working reliably in a client laptop is assigning in the tinc-up file a fixed ipv6 address. this way it never fails, but is not desired if i want my laptop with tinc ipv6 receiving dynamic addresses and letting the fixed ones for nodes and servers. On the troubleshooting process, i have done a lot of things. For example i ran radvdump that gave me extra information that i didn't know beforehand, it helped me to solve a DNS issue i was facing too. Since the problem is on dynamic clients, i thought setting up a dhcpv6 server could solve the issue, but it didnt too. It sometimes send addresses to clients, alongside with the stateless ones coming from f000/64 range, so a machine gets like 5 or more addresses. Any help is appreciated -- Cordialmente Leonardo Taborda Ángel leonardotaborda(a)networkbogota.org www.networkbogota.org "When there is a will, there is a way"