6 Feb
2017
6 Feb
'17
2:41 p.m.
so, Illario and Marvin, did you were able to build a 4mb image with opkg
and openvpn? or an image with just opkg or openvpn. I'd like to know
since I am running here also vpns in some nodes.
El 06/02/17 a las 01:31, Marvin Arnold escribió:
After doing that, I was able to get an openvpn
connection working.
But I had to comment out some parts of my config file that referenced
dnsmasq because that wasn't installed. I'm recompiling lime now with
dnsmasq to try again.
Are there any other steps I need to take so that lime routes internet
traffic through the VPN?
On 02/05/2017 04:21 PM, Ilario wrote:
--
Cordialmente
Leonardo Taborda Ángel
leonardotaborda(a)networkbogota.org
www.networkbogota.org
"When there is a will, there is a way"
2017-02-03 17:20 GMT+01:00 Pau
<pau(a)dabax.net>et>:
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users On lime-build, you can make your own selection of
packets executing the
menu config:
make T=ar71xx menuconfig
This is a good option, not too difficult if you have a
Linux pc
available (does it work also on Macintosh OS?).
You can do the same also for ar71xx-mini, I tried it adding OPKG, Tinc
and OpenVPN-ssl via the menuconfig.
The image for the majority (e.g. all of the TP-Link models are
included) of the 4 MB flash routers was created anyway.
I think that using a 4 MB router for VPN is not a foolish idea, if I
got it correctly in Freifunk they often do this.
Bye!
Ilario
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users