22 May
2017
22 May
'17
6:25 p.m.
Hi all,
flashed the precompiled binary.
Interface WAN does not come up WAN6 does. So I can't test stability in
concern of internet traffic.
Minor flaw: Meshpoint SSID isn't set as usual.
About every 10 sec dmesg: br-lan: received packet on bat0 with own address
as source address
Devices mesh as expected.
Cheers
Pau <pau(a)dabax.net> schrieb am Mo., 22. Mai 2017 um 11:15 Uhr:
On 21/05/17 23:30, Juergen Kimmel wrote:
--
./p4u
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
Hi Ilario you got me. Has been a typo - minus
instead of underscore -.
So this time output ok.
But also this firmware ends in a bootloop triggered by traffic.
Still waiting for daniel golle's efforts on mt7620 drivers
Cheers
Hi Jurgen.
There is a patch which may fix some stuff related with 802.11s, but it
is not applied automatically. Please, make sure you are using the last
lime-sdk (execute git pull).
You have to manually execute a script snippet like this:
bash snippets/patch_sdk_mac80211.sh
Then recompile the packages:
./cooker -b ramips/mt7620
And finally cook the firmware
./cooker -c ramips/mt7620 --flavor=lime_default --profile=zbt-ape522ii
Recently I added a way to enable 11s by default (instead of adhoc) in
the firmware, you have to use a community profile like this:
./cooker -c ramips/mt7620 --flavor=lime_default --profile=zbt-ape522ii
--community=libremesh/11s
** the communities profiles are listed here:
https://github.com/libremesh/network-profiles
** read the README.md of lime-sdk to understand what a community profile
is.
You can also download precompiled binaries with the patch and 11s
enabled from here:
http://repo.libremesh.org/lime-17.04/targets/ramips/mt7620/zbt-ape522ii/lim…
Please, let us know if it works for you. I don't have this hardware and
I cannot test by myself.
Cheers.
Ilario Gelmetti <iochesonome(a)gmail.com> schrieb am So., 21. Mai 2017 um
11:42 Uhr:
> On 05/20/2017 11:55 PM, Juergen Kimmel wrote:
>> Cooking went flawlessly but output has been a vanilla Lede firmware.
>> Did I overlook something?
>
> Can you post the cooker command you used?
> I tried to replicate using:
> ./cooker -c ramips/mt7620 --flavor=lime_default --profile=zbt-ape522ii
> --update-feeds
>
> and I got:
> ls output/ramips/mt7620/zbt-ape522ii/lime_default/
> lede-17.01.1-libremesh-ramips-mt7620-device-zbt-ape522ii.manifest
>
lede-17.01.1-libremesh-ramips-mt7620-zbt-ape522ii-squashfs-sysupgrade.bin
> sha256sums
>
> I can't verify if the image works but I can say it contains many
> LibreMesh related files, using:
> binwalk -e
>
lede-17.01.1-libremesh-ramips-mt7620-zbt-ape522ii-squashfs-sysupgrade.bin
Did you use a different lime-sdk command?
Can you check the firmware image content with binwalk (is there any
other way)?
Bye!
Ilario
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users