19 Apr
2017
19 Apr
'17
3:24 p.m.
On Wednesday 19 April 2017 15:52:08 IST Ruairi Hickey wrote:
On Wednesday 19 April 2017 16:34:05 IST Pau wrote:
Hi,
While the mesh appears to be up and the stations can see each other there
is no ip connectivity - if a client is connected to the libremesh.org via AP
node d9:18:6e it can connect to the internet / outside via AP d9:44:80. Are
there additional steps required to enable this (it works out of the box on ad-
hoc) ? Apologies if I am asking stupid questions.... this is new to me but
if I can assist in any way please let me know...
Thanks,
Ruairi
list modes 'ap'
list modes 'apname'
list modes 'ieee80211s'
option channel_2ghz '11'
option channel_5ghz '48'
Hi,
That seems to have worked OK.... I have a 3rd box at home which I will
test as well to try get all 3 on the mesh. The routers are 3 x TPLink TL-
WR841N.
iw dev wlan0-mesh station dump
Station 84:16:f9:d9:18:6e (on wlan0-mesh)
inactive time: 20 ms
rx bytes: 492473
rx packets: 7570
tx bytes: 270
tx packets: 3
tx retries: 0
tx failed: 0
signal: -19 [-20, -26] dBm
signal avg: -18 [-20, -22] dBm
Toffset: -335602982 us
tx bitrate: 6.5 MBit/s MCS 0
rx bitrate: 19.5 MBit/s MCS 2
mesh llid: 7348
mesh plid: 5441
mesh plink: ESTAB
mesh local PS mode: ACTIVE
mesh peer PS mode: ACTIVE
mesh non-peer PS mode: ACTIVE
authorized: yes
authenticated: yes
preamble: long
WMM/WME: yes
MFP: no
TDLS peer: no
connected time: 390 seconds
Thanks,
Ruairi