17 Nov
2016
17 Nov
'16
12:33 p.m.
thanks bruno and ilario for the detailed answers, I didnt have idea it
will have the same address always.
Let me ask you something else. In two routers i set up a librenet6
tunnel, and the devices got exactly the same anygw IP6, won't it
conflict later when i plug both router to the internet in separate
places? this is the ip 2a00:1508:a94:9400::1
thanks!!
El 17/11/16 a las 05:43, Ilario escribió:
2016-11-17 2:15 GMT+01:00 Leonardo Taborda
<leonardotaborda(a)networkbogota.org>rg>:
--
Cordialmente
Leonardo Taborda Ángel
leonardotaborda(a)networkbogota.org
www.networkbogota.org
"When there is a will, there is a way"
I am messing with a libremesh router, wdr3500 and
wdr3600. On those
devices i flashed an image cooked on the chef, getting the same ip on
both devices: 10.148.0.1. I tried to change the ip on Simple Config /
Advanced, with no luck. If I try to modify the values on the IPV4 field,
they apparently are kept, but reviewing the interfaces the same ip
remains, so route -n in any client shows the same IP.
(others already answered,
but repetition helps to make things clear)
Each LiMe routers have 2 IPv4 (yes, you can have as many IPs you want
on every network interface):
* the common IPv4 which usually is 10.something.0.1 and is the same
for every router, is your gateway and the IP for thisnode.info
* a specific IPv4 which is auto assigned (and difficult to predict)
until when, optionally, you customize it.
Byyye,
Ilario
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users