Re: [lime-users] LiMe 17.06 on WR2543ND - lime

6 Aug 2018

On 05/08/18 23:45, Brian Russell wrote:
...
  cetere, ĉu vi parolas esperanton? Mi rimarkis ke via
apodo estas
 amuza...;-)

 Hi!
I'd like to but I don't speak Esperanto, despite my name.
...

 On Sun, Aug 5, 2018 at 11:43 PM, Brian Russell &lt;brinerustle(a)gmail.com
 <mailto:brinerustle@gmail.com>> wrote:

     you could also try upgrading to the 18.06, it's now stable:

http://downloads.lede-project.org/releases/18.06.0/targets/ar71xx/generic/o…

<http://downloads.lede-project.org/releases/18.06.0/targets/ar71xx/generic/openwrt-18.06.0-ar71xx-generic-tl-wr2543-v1-squashfs-sysupgrade.bin>

 But that's an OpenWRT image, or is it a LiMe one?

...

     On Sun, Aug 5, 2018 at 11:29 PM, Brian Russell
     &lt;brinerustle(a)gmail.com <mailto:brinerustle@gmail.com>> wrote:

         for interface status, a good command is:

         ip a s

         this means ip address show.

Thank you, I will try it.
...

         On Sun, Aug 5, 2018 at 7:34 PM, amuza &lt;amuza(a)riseup.net
         <mailto:amuza@riseup.net>> wrote:

             Hi,

             I had a node working ok with LiMe 16.07. It is a TP-Link
             WR2543ND.

             I tried to upgrade it to LiMe 17.06 using the
             sysupgrade.bin image from
             my network profile on chef.libremesh.org
             <http://chef.libremesh.org>

             After restarting it did not publish any SSID. I connected
             through
             Ethernet and I was able to go into luci with my browser
             (http://anygw/).
             In Administration > Network > Wireless I could see the
             SSID modes were
             on "Client"

             Then I tried by upgrading it with the factory.bin image.
             I had the same results, but this time I see the mode for
             the three SSIDs
             is "Unknown".

             - How do I check those things (like interface status)
             through commands?
             - Any suggestion on how to troubleshoot to make this
             router work with LiMe 17.06? There must be something wrong
             in the image.

             Cheers!

             _______________________________________________
             lime-users mailing list
             lime-users(a)lists.libremesh.org
             <mailto:lime-users@lists.libremesh.org>
             https://lists.libremesh.org/mailman/listinfo/lime-users
             <https://lists.libremesh.org/mailman/listinfo/lime-users>