I did not try but I suppose that if you create an interface specific configuration specifying only the channel, it may work. So, try adding something like this https://github.com/libremesh/lime-packages/blob/e572b4531b2fdcc89965974e0b2… config wifi radio0 option channel 6 In /etc/config/lime-node run lime-config and reboot. If the radio cannot do both 2.4 and 5 at the same time, clearly this way you'll have only 2.4 GHz. Let us know! Ciao, Ilario On Sep 4, 2020 15:22, SAn via lime-users <lime-users(a)lists.libremesh.org> wrote: > > Hi! > > AFAIk we don't have support for this kind of radios. What would you expect that libremesh do in this case? Have an option somehow to select the band? > > Best! > SAn > > On September 4, 2020 9:51:41 AM GMT-03:00, Martin Kennedy <hurricos(a)gmail.com> wrote: > >For context, the PHY is 2.4 OR 5, not dual-band-concurrent. > >Martin > > > > > >On Fri, Sep 4, 2020 at 7:13 AM Andy Schopf <andymcschopf(a)gmail.com> > >wrote: > > > >> Hi, > >> > >> I got a interesting thing - an Meraki MX60W. > >> It has an 2-Band Wifi with 2.4 and 5 Ghz in one phy. > >> The lime-autogen generates only an 5Ghz WLAN - the 2.4 remains > >unused. > >> How can I get both working? > >> _______________________________________________ > >> lime-users mailing list > >> lime-users(a)lists.libremesh.org > >> https://lists.libremesh.org/mailman/listinfo/lime-users > _______________________________________________ > lime-users mailing list > lime-users(a)lists.libremesh.org > https://lists.libremesh.org/mailman/listinfo/lime-users