Hi Ilario Gelmetti Im not able to build a image for Xunlong Orange Pi Plus using chef ? Regards On Sat, Nov 11, 2017 at 7:26 PM, Ilario Gelmetti <iochesonome(a)gmail.com> wrote:

On 11/13/2017 06:00 AM, Mark Birss wrote: I also managed to build an image for that router on the new Chef. Do not use the old one, the new one is here: https://chef.libremesh.org/ What I selected is: Distribution: LibreMesh Release: 17.06 Router Model: Xulong Orange Pi Plus Network Profile: None Libremesh Flavor: lime_default

Hi, I only joined the list today so apologies if I’m bringing up old news ;-) In response to this thresd, yes I was able to cook several firmwares for the gl-ap150 with different profiles. I wasn’t able to cook anything for any of the raspberry pi variants I’ve been trying to get a pi2 lime default firmware that includes kmod-rtl8192cu but chef just returns “requested image is too big for requested target. retry with less packages” and a link to the <https://ledeupdate.planetexpress.cc/static/faillogs/65571141b31a.log> Build log: If anyone’s interested, here are a couple of the latest build logs: https://ledeupdate.planetexpress.cc/static/faillogs/65571141b31a.log https://ledeupdate.planetexpress.cc/static/faillogs/a12757de64ed.log No matter which image I try from the repo, my pi2 always hangs on the rainbow screen ….. With a little bit of url snipping I went to https://ledeupdate.planetexpress.cc/static/ and then drilled down to https://ledeupdate.planetexpress.cc/static/lime/17.06/brcm2708/bcm2709/rpi-… where I found some recent sd card images, including one in which the manifest lists kmod-rtl8192cu. Celebrations have been shortlived L , my pi2 once again is hanging on the rainbow screen ….. I guess my next option is to try and build it locally, which I’ll look at tonight. Is there a forum or somewhere I can usefully put my results and perhaps catch up on the good work being done by others? If the pi target builds are broken will my pottering provide useful info for other noobs? (note, I’ll still be doing the pottering whether or not there is somewhere to plonk the results). Thanks David From: lime-users [mailto:lime-users-bounces@lists.libremesh.org] On Behalf Of bruno vianna Sent: 13 November 2017 18:00 To: libremesh users &lt;lime-users(a)lists.libremesh.org&gt; Subject: Re: [lime-users] Libremesh with authentication on mesh I just wanted to confirm-- is anyone able to cook a firmware in the new chef (https://chef.libremesh.org/) choosing a community network profile? I get hung forever on "building image". Thanks Bruno On Mon, Nov 13, 2017 at 9:06 AM, Ilario Gelmetti &lt;iochesonome(a)gmail.com <mailto:iochesonome@gmail.com> > wrote: On 11/13/2017 06:00 AM, Mark Birss wrote: I also managed to build an image for that router on the new Chef. Do not use the old one, the new one is here: https://chef.libremesh.org/ What I selected is: Distribution: LibreMesh Release: 17.06 Router Model: Xulong Orange Pi Plus Network Profile: None Libremesh Flavor: lime_default _______________________________________________ lime-users mailing list lime-users(a)lists.libremesh.org <mailto:lime-users@lists.libremesh.org> https://lists.libremesh.org/mailman/listinfo/lime-users -- <mailto:bruno@pobox.com> bruno(a)pobox.com ▀─█▄██▄▀▄ <http://brunovianna.net/> http://brunovianna.net ─█▄██▄▀█▀█▄ skype: randomico▀─█▄██▄▀█▀█▄▌██─█▌█▌

Hi Paul, Mate, don't apologise! Kudos for a brilliant project! :-) All the best, David -----Original Message----- From: Paul Spooren [mailto:spooren@informatik.uni-leipzig.de] Sent: 13 November 2017 21:02 To: libremesh users &lt;lime-users(a)lists.libremesh.org&gt;rg>; David Hardy &lt;david(a)hardy.it&gt;it>; bruno(a)pobox.com Subject: Re: [lime-users] Libremesh with authentication on mesh On 13.11.2017 20:10, David Hardy wrote: Hi Bruno and David, I'm most sorry for the trouble chef caused you recently. Currently I'm the only dev of chef and the backend server creating the images. Initially the backend was not meant to produce factory images but only sysupgrades. Some further information can be obtained here: https://github.com/aparcar/attendedsysupgrade-server All "failed" builds are in this list: https://ledeupdate.planetexpress.cc/fails Failed is somewhat wrong as the server could just not find the "sysupgrade" image but only a factory one (or none at all). This is due to the initial scope of the project. I'll try to fix the RPI as soon as possible and add a banner pointing out the young stage of chef. Thanks for you feedback, please don't hesitate to add comments & thoughts. Best, Paul

On 14.11.2017 00:54, David Hardy wrote: Hi, I changed some stuff in chef and hopefully Raspberry Pis now create usable images. Let me know! Best, Paul