On 12/10/20 1:55 PM, Juergen Kimmel wrote: Not anymore :D Now lime-app can be selected without FirstBootWizard. With OpenWrt 18.06.x there was no problem. With OpenWrt 19.07.4 there was a problem which has been completely solved in OpenWrt 19.07.5 which has been released yesterday. So I just updated the development page on the website stating that to compile an image people should use the v19.07.5 branch of OpenWrt code: https://libremesh.org/development.html#compiling_libremesh_from_source_code Ciao! Ilario -- Ilario iochesonome(a)gmail.com ilario(a)sindominio.net _______________________________________________ lime-users mailing list lime-users(a)lists.libremesh.org https://lists.libremesh.org/mailman/listinfo/lime-users

On 12/13/20 12:37 PM, Juergen Kimmel wrote: lime-app has limited configuration capabilities (intentionally), an attempt of list of lime-app features can be found at https://github.com/libremesh/lime-packages/issues/327 If you want to have full access to configuration you'll have to access the router using SSH, add configuration lines in /etc/config/lime-node and apply it with "lime-config" command. The documentation for /etc/config/lime-node is on the documentation of the website: https://libremesh.org/docs/ and in the lime-example.txt file which can be found online at https://github.com/libremesh/lime-packages/blob/master/packages/lime-docs/f… or on the router at /docs/lime-example.txt and http://thisnode.info/docs/lime-example.txt If you cannot connect to the router using SSH, check out the documentation on the website: https://libremesh.org/docs/en_connecting_nodes.html and https://libremesh.org/docs/en_troubleshooting.html Ciao! Ilario _______________________________________________ lime-users mailing list lime-users(a)lists.libremesh.org https://lists.libremesh.org/mailman/listinfo/lime-users