I am not an expert and my experience with *libremesh* is limited, but I
think it is best suited for "local" meshing. I heard that *yggdrasil*
have a pretty good throughput on long distance.
I don't know what protocol are used on
Guifi.net whole network. Is it a
*DHT*?
Le 18/06/2019 à 01:28, Patricio Gibbs via lime-users a écrit :
Anything?
El 9 de junio de 2019 8:16:54 p. m. GMT-05:00, Patricio Gibbs via
lime-users <lime-users(a)lists.libremesh.org> escribió:
I've heard that the usual 802.11 WiFi standards were designed for
household links, maybe up to a kilometer? And therefore longer distance
links tend to use other protocols, with TDMA or other methods. So, if
we're going to set up 5km links, 10km links, 20km links, 40km links...
at what point does it make sense to stop using standard WiFi?
For example, if we set up an 8km link with a MikroTik LHG5 on each end,
or a TP-Link CPE610 on each end, will the link quality be the same with
stock firmware as with LibreMesh? Up to what distance is this true?
cheers,
Patrick
------------------------------------------------------------------------
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users