I'll try to setup a testbed for testing 802.11s at my place and let you know the results. In any case, it would be better if you can use the last pre-release for libremesh: http://repo.libremesh.org/lime-17.04 Cheers. On 20/04/17 20:04, Ruairi Hickey wrote: > On Thursday 20 April 2017 11:34:09 IST you wrote: >> On 19/04/17 20:46, Ruairi Hickey wrote: >>> On Wednesday 19 April 2017 19:29:59 IST Ilario Gelmetti wrote: >>>> On 04/19/2017 05:25 PM, Ruairi Hickey wrote: >>>>> While the mesh appears to be up and the stations can see each other >>>>> there is no ip connectivity - if a client is connected to the >>>>> libremesh.org >>>>> via AP node d9:18:6e it can not connect to the internet / outside >>>>> via >>>>> AP >>>>> d9:44:80. >>>> >>>> Hi Ruairi! >>>> Have you plugged an internet connection to a WAN port of your >>>> router? >>>> If your router doesn't have a WAN port you will have to configure >>>> another one as WAN (check out /etc/config/lime-example and >>>> http://libremesh.org/docs/changing_network_behavior.html ). >>>> If this doesn't work: can you post the content of >>>> /etc/config/network >>>> on >>>> your LibreMesh router? >>>> And the output of the "ip address show" commend. >>>> >>>>> Are there additional steps required to enable this (it works >>>>> out of the box on ad- hoc) ? >>>> >>>> No, it should automagically work when you plug the WAN port of the >>>> LiMe >>>> router into a LAN port of a router offering a DHCP server and a >>>> gateway >>>> to the internet. >>>> Let us know! >>>> Ilario >>> >>> Hi Ilario, >>> >>> The WAN port is connected to the switch and if that is the only >>> router in >>> >>> up / or if I connect to that when connecting to SSID libremesh.org I >>> can >>> connect to the internet. >>> >>> If I connect to either of the other 2 nodes I cannot connect to >>> the >>> >>> Internet... >> >> The link layer seems to work fine in your setup, so the problem is >> proably in the mac or ip layer. Please, run the next test and attach >> the >> output: >> >> Run "bmx6 -c originators" to see all nodes in the network. >> >> Run "bmx6 -c links" to see the one-hop nodes >> >> Run "batctl o" to see the layer2 nodes >> >> Run "bmx6 -cp" on the node with Internet connection to see if the >> tunIn >> for sharing Internet is enabled (inet4). >> >> Cheers. >> >>> I've attached 2 text files (one for each router with the file >>> contents) >>> router connected to switch (WAN port) / Internet >>> router-d94040.txt >>> >>> router in mesh >>> router-d94480.txt >>> >>> Thanks, >>> >>> Ruairi >>> >>> (if the attachments get stripped I'll resend with the contents >>> inline..) >>> >>> >>> >>> _______________________________________________ >>> lime-users mailing list >>> lime-users(a)lists.libremesh.org >>> https://lists.libremesh.org/mailman/listinfo/lime-users > > Hi, > > If it would be of assistance I can give you ssh access to the router > ... I > > have it behind a static IP, just need to open up the firewall. > > Ruairi

On Tuesday 2 May 2017 23:15:40 IST Ruairi Hickey wrote: > ---------- Forwarded Message ---------- > > Subject: Re: [lime-users] 802.11s config > Date: Tuesday 2 May 2017, 21:48:57 IST > From: Ruairi Hickey <ruairi.hickey-mesh(a)collon.ie > To: lime-users(a)lists.libremesh.org > > On Wednesday 26 April 2017 12:47:04 IST you wrote: > > I'll try to setup a testbed for testing 802.11s at my place and let you > > know the results. > > > > In any case, it would be better if you can use the last pre-release for > > libremesh: http://repo.libremesh.org/lime-17.04 > > > > Cheers. > > > > On 20/04/17 20:04, Ruairi Hickey wrote: > > > On Thursday 20 April 2017 11:34:09 IST you wrote: > > > > On 19/04/17 20:46, Ruairi Hickey wrote: > > > > > On Wednesday 19 April 2017 19:29:59 IST Ilario Gelmetti wrote: > > > > > > On 04/19/2017 05:25 PM, Ruairi Hickey wrote: > > > > > > > While the mesh appears to be up and the stations can see each other > > > > > > > there is no ip connectivity - if a client is connected to the > > > > > > > libremesh.org > > > > > > > via AP node d9:18:6e it can not connect to the internet / outside > > > > > > > via > > > > > > > AP > > > > > > > d9:44:80. > > > > > > > > > > > > Hi Ruairi! > > > > > > Have you plugged an internet connection to a WAN port of your > > > > > > router? > > > > > > If your router doesn't have a WAN port you will have to configure > > > > > > another one as WAN (check out /etc/config/lime-example and > > > > > > http://libremesh.org/docs/changing_network_behavior.html ). > > > > > > If this doesn't work: can you post the content of > > > > > > /etc/config/network > > > > > > on > > > > > > your LibreMesh router? > > > > > > And the output of the "ip address show" commend. > > > > > > > > > > > > > Are there additional steps required to enable this (it works > > > > > > > out of the box on ad- hoc) ? > > > > > > > > > > > > No, it should automagically work when you plug the WAN port of the > > > > > > LiMe > > > > > > router into a LAN port of a router offering a DHCP server and a > > > > > > gateway > > > > > > to the internet. > > > > > > Let us know! > > > > > > Ilario > > > > > > > > > > Hi Ilario, > > > > > > > > > > The WAN port is connected to the switch and if that is the only > > > > > router in > > > > > > > > > > up / or if I connect to that when connecting to SSID libremesh.org I > > > > > can > > > > > connect to the internet. > > > > > > > > > > If I connect to either of the other 2 nodes I cannot connect to > > > > > the > > > > > > > > > > Internet... > > > > > > > > The link layer seems to work fine in your setup, so the problem is > > > > proably in the mac or ip layer. Please, run the next test and attach > > > > the > > > > output: > > > > > > > > Run "bmx6 -c originators" to see all nodes in the network. > > > > > > > > Run "bmx6 -c links" to see the one-hop nodes > > > > > > > > Run "batctl o" to see the layer2 nodes > > > > > > > > Run "bmx6 -cp" on the node with Internet connection to see if the > > > > tunIn > > > > for sharing Internet is enabled (inet4). > > > > > > > > Cheers. > > > > > > > > > I've attached 2 text files (one for each router with the file > > > > > contents) > > > > > router connected to switch (WAN port) / Internet > > > > > router-d94040.txt > > > > > > > > > > router in mesh > > > > > router-d94480.txt > > > > > > > > > > Thanks, > > > > > > > > > > Ruairi > > > > > > > > > > (if the attachments get stripped I'll resend with the contents > > > > > inline..) > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > lime-users mailing list > > > > > lime-users(a)lists.libremesh.org > > > > > https://lists.libremesh.org/mailman/listinfo/lime-users > > > > > > Hi, > > > > > > If it would be of assistance I can give you ssh access to the router > > > ... I > > > > > > have it behind a static IP, just need to open up the firewall. > > > > > > Ruairi > > Hi, > Apologies, I missed one of your emails last week ... thought it was a > duplicate send....I will run the bmx6 commands etc when the I manage to > resolve the issue below.... > > I have installed the image from 26.04 on the routers last night but > there is > an error bringing up the wlan0-mesh interface > > Thu Apr 27 13:54:26 2017 kern.info kernel: [ 20.659483] IPv6: > ADDRCONF(NETDEV_UP): wlan0-mesh: link is not ready > Thu Apr 27 13:54:26 2017 daemon.notice netifd: radio0 (913): command > failed: > Resource busy (-16) > Thu Apr 27 13:54:26 2017 daemon.notice netifd: radio0 (913): command > failed: > Link has been severed (-67) > > > Thanks, > Ruairi > > > > > > ----------------------------------------- > _______________________________________________ > lime-users mailing list > lime-users(a)lists.libremesh.org > https://lists.libremesh.org/mailman/listinfo/lime-users Hi, Do I need the wpad-mesh pkg installed - Does wpad-mini support 80211s ? Thanks Ruairi _______________________________________________ lime-users mailing list lime-users(a)lists.libremesh.org https://lists.libremesh.org/mailman/listinfo/lime-users