Re: [lime-dev] Flashing Ubiquiti Devices

Sorry, I forgot to specify the model of my devices: 1) Ubiquiti PicoStation M2 HP [1] Processor Atheros MIPS 24KC, 400 MHz Memory 32 MB SDRAM, 8 MB Flash Ethernet Port 1 x 10/100 2) Ubiquiti NanoStation M5 [2] Processor Atheros MIPS 24KC, 400 MHz Memory 32 MB SDRAM, 8 MB Flash Ethernet Ports 2 x 10/100 For both these devices the target image should be ar71xx [3] and from [4] "The bullet-m image is the base of the airmax series." "The nano-m image is the bullet-m with an additionnal ethernet." Bye, Ilario [1] http://www.ubnt.com/downloads/datasheets/picostationm/picom2hp_DS.pdf

[3] http://wiki.openwrt.org/toh/start#ubiquiti [4] http://wiki.openwrt.org/toh/ubiquiti/airmaxm Il 14/01/2014 12:41, Pau ha scritto: > I think bullet M is ar71xx but PicoStation is Atheros 24xx (same > of Fonera). So you should compile for such a target (named > Atheros in OpenWrt). > > Personally I don't recomend such devices since the CPU is very > slow (180MHz), same for the internal flash. If you want a similar > device buy a Bullet M2/M5 or Rocket M2/M5 which has a newer and > faster CPU (400MHz). > > Cheers. > > On 01/14/14 00:55, Ilario Gelmetti wrote: >> Hi all! I compiled libre-mesh encountering only a small >> problem: subversion is needed but missing in the dependencies >> list. I was planning to flash libre-mesh on Ubiquiti >> PicoStation and Ubiquiti NanoStation. Can I safely flash using >> libre-mesh/images/bin/openwrt-ar71xx-generic-ubnt-bullet-m-squashfs-sysupgrade.bin >> >>

_______________________________________________ Dev mailing list Dev(a)lists.libre-mesh.org https://lists.libre-mesh.org/mailman/listinfo/dev