21 Jul
2019
21 Jul
'19
12:28 a.m.
Well at least I'm not going mad then! Could I perhaps ask for some
general advice Mark on building a more up to date libremesh. I'm running
the released version but on another project I've found plain vanilla
openwrt 18 is considerably better than 17. Is there a sensible path to
get a libremesh 18? This is for a home lab, nothing fancy running only
3 nodes, so it doesn't need to be production quality. I had hoped the
development.html web page would be enough to give me working build
options, but as you have seen, I'm not making much progress.
With v17, I make use of the distributed DHCP, although I could live
without that if it was problematic.
Thanks in advance ...
On 21/07/19 8:49 am, Mark Birss wrote:
yes, lime-proto-anygw disappear when
selecting dnsmasq-lease-share.
but seems i dont use it for my builds. I use BATMAN-adv gw mode
On Sat, Jul 20, 2019 at 10:25 PM David Medland-Slater
<david.medlandslater(a)gmail.com <mailto:david.medlandslater@gmail.com>>
wrote:
Yes that gives me the same result Mark. For me then, at the point of
running menuconfig, lime-proto-anygw is visible. Enable
dnsmasq-lease-share and it disappears. As from the docs both need
to be
selected, I appear to be stuck.
Do you get the same effect; selecting dnsmasq-lease-share makes
lime-proto-anygw disappear and if you search, it has been deselected?
On 21/07/19 6:58 am, Mark Birss wrote:
echo "CONFIG_PACKAGE_dnsmasq=n"
>> .config
echo "CONFIG_PACKAGE_dnsmasq-dhcpv6=y" >> .config
echo "CONFIG_PACKAGE_odhcpd=n" >> .config
make defconfig
_______________________________________________
lime-dev mailing list
lime-dev(a)lists.libremesh.org <mailto:lime-dev@lists.libremesh.org>
https://lists.libremesh.org/mailman/listinfo/lime-dev
_______________________________________________
lime-dev mailing list
lime-dev(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-dev