16 Sep
2014
16 Sep
'14
2:38 p.m.
Thank you pau,
For now, i put a /etc/init.d/network restart in startup script and i’m not
kicked anymore.
With this i can do all test i need.
Regards
On Tuesday, September 16, 2014, Pau <pau(a)dabax.net> wrote:
disconnected
--
*Gabriel H. Giovaniello*
*+54 2216230146*
I would need to test the images in my routers to
reproduce your problem.
However I've a lot of work to do these days and
I'll be disconnected during
this week, so I cannot help you now, sorry.
@Others, please help Gabriel :)
On 16/09/14 16:16, gabriel giovaniello wrote:
> I tried with your new firmware upload but same issue, libremesh not
appear
at boot, i
need to shutdown and start wifi with physical button and i can
connect to wifi LiMe without being kicked.
For testing purposes i will use firmware as is.
Is any command-line i can use to do the same as wifi on/off with physical
button?
I’m thinking about startup command so can work without intervention.
Sorry for being so noob.
On Tuesday, September 16, 2014, gabriel giovaniello <gabrielgio(a)gmail.com
> wrote:
> > Excellent!
> > I will try right now.
> >
> >
> > I Sept 13 compilation i found that if i shutdown wifi with physical
> button of WR841ND and start again, appears libremesh network and Lime
> network (before libremesh was not there) and i’m not kicked from wifi.
> > So to be clear i will describe what i do and results:
> > 1) flashed
> > 2) connect with cable to lan and successfully receive IP
> > 3) Connect another device from wifi and i receive IP but i’m > about 20 seconds.
> >
> > Log mention something about MTU i tried to change but still error
there.
> >
> > If i shutdown wifi on router with wifi on/off button and start wifi
again.
> >
> > In my wifi networks appears libremesh (before was not there) and i can
> connect without kick.
> >
> >
> > Here i attach Kernel Log of Sep 13 compilation, hope this help to
figure
> out what happened:
> > [ 0.000000] Linux version 3.10.49 (lime@qmpbuild) (gcc version 4.8.3
> (OpenWrt/Linaro GCC 4.8-2014.04 r41825) ) #230 Sat Sep 13 13:54:27 CEST
2014
> > [ 0.000000] MyLoader: sysp=ab02aeab,
boardp=a2abaaa2, parts=aa22aaaa
> > [ 0.000000] bootconsole [early0] enabled
> > [ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
> > [ 0.000000] SoC: Qualcomm Atheros QCA9533 rev 1
> > [ 0.000000] Clocks: CPU:550.000MHz, DDR:399.389MHz, AHB:199.694MHz,
> Ref:25.000MHz
> > [ 0.000000] Determined physical RAM map:
> > [ 0.000000] memory: 02000000 @ 00000000 (usable)
> > [ 0.000000] Initrd not found or empty - disabling initrd
> > [ 0.000000] Zone ranges:
> > [ 0.000000] Normal [mem 0x00000000-0x01ffffff]
> > [ 0.000000] Movable zone start for each node
> > [ 0.000000] Early memory node ranges
> > [ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
> > [ 0.000000] On node 0 totalpages: 8192
> > [ 0.000000] free_area_init_node: node 0, pgdat 802fca90,
node_mem_map
81000000
> ./p4u