Re: [lime-dev] Extracting full mesh topology of BMX6

I haven’t used the OpenWRT-18.06 version yet so it might be different there. I’m working with https://github.com/libremesh/lime-sdk/commit/c3385846bf74d9b7530bc333f59fef… normally but even on the default LibreMesh build from https://downloads.libremesh.org/dayboot_rely/17.06/targets/ i usually use *curl 'http://thisnode.info/cgi-bin/bmx6-info?$neighbours <http://thisnode.info/cgi-bin/bmx6-info?$neighbours>**’* to get a JSON from another machine or just run the script if I’m connected over SSH to any node. I believe it was located in /www/cgi-bin/bmx6-info On 9 November 2018 at 22:04:15, David Johnson (david.lloyd.johnson(a)gmail.com) wrote: I'm using Libremesh version openwrt-18.06 I want to extract the topology of the mesh in a json format for some visualization software we are building. What do you suggest is the best way of doing this BMX6 version is: BMX6-0.1-alpha comPatibility=16 revision=0312168aaa384379ccbefd4b2d936fc698664d5b So far I've tried - opkg install bmx6-topology to try and use the topology plugin ... but this doesn't exist on this libremesh release - Using the b6m-jsonp script https://gitlab.com/sim6/sim6s-b6m/blob/master/www/cgi-bin/b6m-jsonp But logread shows: user.notice b6m-jsonp: ERROR: globalId not found, abort So this version of BMX6 is not exporting that $globalId Any suggestions Thanks David -- Dr David Johnson Director, Ammbr Research Labs South Africa Part of the AmmbrTech Group http://www.ammbrtech.com Adjunct Senior Lecturer ICT4D, Computer Science Department University of Cape Town https://people.cs.uct.ac.za/~djohnson/ _______________________________________________ lime-dev mailing list lime-dev(a)lists.libremesh.org https://lists.libremesh.org/mailman/listinfo/lime-dev