1 Nov
2017
1 Nov
'17
2:46 p.m.
Hello Libremesh team, first and foremost thank you for your hard work and
effort that has gone into creating this platform.
I have a question regarding the creation of local network profiles. Based
on the directory structure for the community profiles established. In order
to customize the firmware are we supposed to place the lime-default file
in lime-sdk/communities/communityname/profilename/etc/config/
When I specify my own custom profile, the cooked firmware is not customized
using the "--community=name/profile"" switch. I can successfully cook the
pre-existing network-profiles that were downloaded from the git. Is there
any additional documentation regarding this function that I may have missed
for local development?
Thank you,
-Tony
2 Nov
2 Nov
7:51 p.m.
On Wed, 2017-11-01 at 16:46 +0200, Anthony Garcia wrote:
Hello Libremesh team, first and foremost thank you for
your hard work
and effort that has gone into creating this platform.
Yes, a big kudos for every one of us for the community project we are
doing! :)
I have a question regarding the creation of local
network profiles.
Based on the directory structure for the community profiles
established. In order to customize the firmware are we supposed to
place the lime-default file in lime-
sdk/communities/communityname/profilename/etc/config/
Exactly!
When I specify my own custom profile, the cooked
firmware is not
customized using the "--community=name/profile"" switch. I can
successfully cook the pre-existing network-profiles that were
downloaded from the git. Is there any additional documentation
regarding this function that I may have missed for local development?
No. It should work.
Can you post the output of the command as well as the call to the
cooker command?
Regards,
8:37 p.m.
HI Nicolas,
Thank you for your quick response and continued support! I have reinstalled
my sdk to rule out user error. When I try to load libremesh/encrypt-11s
community profile as a test, Cooker sees the
--community=libremesh/encrypt-11s switch but does not cook lime-defaults in
the etc/config folder. I have unpacked my squashfs-root in the output to
verify that the changes were not made. Strangely enough the wpad-mesh
specified from the PACKAGES file is added but anything else in my
root/etc/config folder is ignored. I am using the develop branch on a fresh
install using the wireless-compat fix. Here is my pastebin log
https://pastebin.com/bmxqtbbz
I forgot to connect to the internet during the compile but all of the files
were already updated/downloaded. I do not see any errors during compile. I
have tried several other profiles with the same result. PACKAGES hook will
compile.
Regards,
-Tony
On Thu, Nov 2, 2017 at 9:51 PM, Nicolas Pace <nico(a)libre.ws> wrote:
On Wed, 2017-11-01 at 16:46 +0200, Anthony Garcia
wrote:
Hello Libremesh team, first and foremost thank
you for your hard work
and effort that has gone into creating this platform.
Yes, a big kudos for every one of us for the community project we are
doing! :)
I have a question regarding the creation of local
network profiles.
Based on the directory structure for the community profiles
established. In order to customize the firmware are we supposed to
place the lime-default file in lime-
sdk/communities/communityname/profilename/etc/config/
Exactly!
When I specify my own custom profile, the cooked
firmware is not
customized using the "--community=name/profile"" switch. I can
successfully cook the pre-existing network-profiles that were
downloaded from the git. Is there any additional documentation
regarding this function that I may have missed for local development?
No. It should work.
Can you post the output of the command as well as the call to the
cooker command?
Regards,
_______________________________________________
lime-dev mailing list
lime-dev(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-dev
11:32 p.m.
Second report regarding this,
One important thing is to know if you are using the master branch or
the develop branch (this also applies to bruno question on the other
thread).
The branch that needs to be used it the master branch, unless you are
developing the firmware.
If this is the case, then we might be talking about an issue!
Regards,
On Thu, 2017-11-02 at 22:37 +0200, Anthony Garcia wrote:
HI Nicolas,
Thank you for your quick response and continued support! I have
reinstalled my sdk to rule out user error. When I try to load
libremesh/encrypt-11s community profile as a test, Cooker sees the --
community=libremesh/encrypt-11s switch but does not cook lime-
defaults in the etc/config folder. I have unpacked my squashfs-root
in the output to verify that the changes were not made. Strangely
enough the wpad-mesh specified from the PACKAGES file is added but
anything else in my root/etc/config folder is ignored. I am using the
develop branch on a fresh install using the wireless-compat fix. Here
is my pastebin log https://pastebin.com/bmxqtbbz
I forgot to connect to the internet during the compile but all of the
files were already updated/downloaded. I do not see any errors during
compile. I have tried several other profiles with the same result.
PACKAGES hook will compile.
Regards,
-Tony
On Thu, Nov 2, 2017 at 9:51 PM, Nicolas Pace <nico(a)libre.ws> wrote:
On Wed, 2017-11-01 at 16:46 +0200, Anthony Garcia
wrote:
No. It should work.
Can you post the output of the command as well as the call to the
cooker command?
Regards,
_______________________________________________
lime-dev mailing list
lime-dev(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-dev
_______________________________________________
lime-dev mailing list
lime-dev(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-dev Hello Libremesh team, first and foremost thank
you for your hard
work
and effort that has gone into creating this
platform.
Yes, a big kudos for every one of us for the community project we
are
doing! :)
I have a question regarding the creation of local
network
profiles.
Based on the directory structure for the
community profiles
established. In order to customize the firmware are we supposed
to
place the lime-default file in lime-
sdk/communities/communityname/profilename/etc/config/
Exactly!
When I specify my own custom profile, the cooked
firmware is not
customized using the "--community=name/profile"" switch. I can
successfully cook the pre-existing network-profiles that were
downloaded from the git. Is there any additional documentation
regarding this function that I may have missed for local
development?
11:45 p.m.
Indeed I am using the develop branch as I am compiling firmware for newer
hardware that is not available on master.
Archer-c59-v1
On Nov 3, 2017 1:33 AM, "Nicolas Pace" <nico(a)libre.ws> wrote:
Second report regarding this,
One important thing is to know if you are using the master branch or
the develop branch (this also applies to bruno question on the other
thread).
The branch that needs to be used it the master branch, unless you are
developing the firmware.
If this is the case, then we might be talking about an issue!
Regards,
On Thu, 2017-11-02 at 22:37 +0200, Anthony Garcia wrote:
HI Nicolas,
Thank you for your quick response and continued support! I have
reinstalled my sdk to rule out user error. When I try to load
libremesh/encrypt-11s community profile as a test, Cooker sees the --
community=libremesh/encrypt-11s switch but does not cook lime-
defaults in the etc/config folder. I have unpacked my squashfs-root
in the output to verify that the changes were not made. Strangely
enough the wpad-mesh specified from the PACKAGES file is added but
anything else in my root/etc/config folder is ignored. I am using the
develop branch on a fresh install using the wireless-compat fix. Here
is my pastebin log https://pastebin.com/bmxqtbbz
I forgot to connect to the internet during the compile but all of the
files were already updated/downloaded. I do not see any errors during
compile. I have tried several other profiles with the same result.
PACKAGES hook will compile.
Regards,
-Tony
On Thu, Nov 2, 2017 at 9:51 PM, Nicolas Pace <nico(a)libre.ws> wrote:
_______________________________________________
lime-dev mailing list
lime-dev(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-dev
On Wed, 2017-11-01 at 16:46 +0200, Anthony Garcia
wrote:
No. It should work.
Can you post the output of the command as well as the call to the
cooker command?
Regards,
_______________________________________________
lime-dev mailing list
lime-dev(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-dev
_______________________________________________
lime-dev mailing list
lime-dev(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-dev Hello Libremesh team, first and foremost thank
you for your hard
work
and effort that has gone into creating this
platform.
Yes, a big kudos for every one of us for the community project we
are
doing! :)
I have a question regarding the creation of local
network
profiles.
Based on the directory structure for the
community profiles
established. In order to customize the firmware are we supposed
to
place the lime-default file in lime-
sdk/communities/communityname/profilename/etc/config/
Exactly!
When I specify my own custom profile, the cooked
firmware is not
customized using the "--community=name/profile"" switch. I can
successfully cook the pre-existing network-profiles that were
downloaded from the git. Is there any additional documentation
regarding this function that I may have missed for local
development?
11:48 p.m.
On Fri, 2017-11-03 at 01:45 +0200, Anthony Garcia wrote:
Indeed I am using the develop branch as I am compiling
firmware for
newer hardware that is not available on master.
Archer-c59-v1
So... it might fail ;)
Can you file an issue on the github repo?
Also, I think there is a thread about this same issue.
https://github.com/libremesh/lime-sdk/issues/30
https://github.com/libremesh/lime-sdk/issues/35
Regards,
On Nov 3, 2017 1:33 AM, "Nicolas Pace" <nico(a)libre.ws> wrote:
Second report regarding this,
One important thing is to know if you are using the master branch
or
the develop branch (this also applies to bruno question on the
other
thread).
The branch that needs to be used it the master branch, unless you
are
developing the firmware.
If this is the case, then we might be talking about an issue!
Regards,
On Thu, 2017-11-02 at 22:37 +0200, Anthony Garcia wrote:
_______________________________________________
lime-dev mailing list
lime-dev(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-dev
_______________________________________________
lime-dev mailing list
lime-dev(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-dev HI Nicolas,
Thank you for your quick response and continued support! I have
reinstalled my sdk to rule out user error. When I try to load
libremesh/encrypt-11s community profile as a test, Cooker sees
the --
community=libremesh/encrypt-11s switch but does
not cook lime-
defaults in the etc/config folder. I have unpacked my squashfs-
root
in the output to verify that the changes were not
made. Strangely
enough the wpad-mesh specified from the PACKAGES file is added
but
anything else in my root/etc/config folder is
ignored. I am using
the
develop branch on a fresh install using the
wireless-compat fix.
Here
is my pastebin log https://pastebin.com/bmxqtbbz
I forgot to connect to the internet during the compile but all of
the
files were already updated/downloaded. I do not
see any errors
during
compile. I have tried several other profiles with
the same
result.
PACKAGES hook will compile.
Regards,
-Tony
On Thu, Nov 2, 2017 at 9:51 PM, Nicolas Pace <nico(a)libre.ws>
wrote:
> On Wed, 2017-11-01 at 16:46 +0200, Anthony
Garcia wrote:
> > Hello Libremesh team, first and foremost thank you for your
hard
> work
> > and effort that has gone into creating this platform.
>
> Yes, a big kudos for every one of us for the community project
we
> are
> doing! :)
>
> > I have a question regarding the creation of local network
> profiles.
> > Based on the directory structure for the community profiles
> > established. In order to customize the firmware are we
supposed
> to
> > place the lime-default file in lime-
> > sdk/communities/communityname/profilename/etc/config/
>
> Exactly!
>
> > When I specify my own custom profile, the cooked firmware is
not
> > customized using the
"--community=name/profile"" switch. I
can
> > successfully cook the pre-existing
network-profiles that were
> > downloaded from the git. Is there any additional
documentation
> > regarding this function that I may have
missed for local
> development?
> >
>
> No. It should work.
>
> Can you post the output of the command as well as the call to
the
cooker
command?
Regards,
_______________________________________________
lime-dev mailing list
lime-dev(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-dev
_______________________________________________
lime-dev mailing list
lime-dev(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-dev
3 Nov
3 Nov
midnight
Hidden gem! I just modified cooker referencing fix #30 thank you! Profile
has cooked as intended.
Regards
-Tony
On Nov 3, 2017 1:48 AM, "Nicolas Pace" <nico(a)libre.ws> wrote:
On Fri, 2017-11-03 at 01:45 +0200, Anthony Garcia
wrote:
Indeed I am using the develop branch as I am
compiling firmware for
newer hardware that is not available on master.
Archer-c59-v1
So... it might fail ;)
Can you file an issue on the github repo?
Also, I think there is a thread about this same issue.
https://github.com/libremesh/lime-sdk/issues/30
https://github.com/libremesh/lime-sdk/issues/35
Regards,
On Nov 3, 2017 1:33 AM, "Nicolas Pace" <nico(a)libre.ws> wrote:
_______________________________________________
lime-dev mailing list
lime-dev(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-dev
Second report regarding this,
One important thing is to know if you are using the master branch
or
the develop branch (this also applies to bruno question on the
other
thread).
The branch that needs to be used it the master branch, unless you
are
developing the firmware.
If this is the case, then we might be talking about an issue!
Regards,
On Thu, 2017-11-02 at 22:37 +0200, Anthony Garcia wrote:
_______________________________________________
lime-dev mailing list
lime-dev(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-dev HI Nicolas,
Thank you for your quick response and continued support! I have
reinstalled my sdk to rule out user error. When I try to load
libremesh/encrypt-11s community profile as a test, Cooker sees
the --
community=libremesh/encrypt-11s switch but does
not cook lime-
defaults in the etc/config folder. I have unpacked my squashfs-
root
in the output to verify that the changes were not
made. Strangely
enough the wpad-mesh specified from the PACKAGES file is added
but
anything else in my root/etc/config folder is
ignored. I am using
the
develop branch on a fresh install using the
wireless-compat fix.
Here
is my pastebin log https://pastebin.com/bmxqtbbz
I forgot to connect to the internet during the compile but all of
the
files were already updated/downloaded. I do not
see any errors
during
compile. I have tried several other profiles with
the same
result.
PACKAGES hook will compile.
Regards,
-Tony
On Thu, Nov 2, 2017 at 9:51 PM, Nicolas Pace <nico(a)libre.ws>
wrote:
> On Wed, 2017-11-01 at 16:46 +0200, Anthony
Garcia wrote:
> > Hello Libremesh team, first and foremost thank you for your
hard
> work
> > and effort that has gone into creating this platform.
>
> Yes, a big kudos for every one of us for the community project
we
> are
> doing! :)
>
> > I have a question regarding the creation of local network
> profiles.
> > Based on the directory structure for the community profiles
> > established. In order to customize the firmware are we
supposed
> to
> > place the lime-default file in lime-
> > sdk/communities/communityname/profilename/etc/config/
>
> Exactly!
>
> > When I specify my own custom profile, the cooked firmware is
not
> > customized using the
"--community=name/profile"" switch. I
can
> > successfully cook the pre-existing
network-profiles that were
> > downloaded from the git. Is there any additional
documentation
> > regarding this function that I may have
missed for local
> development?
> >
>
> No. It should work.
>
> Can you post the output of the command as well as the call to
the
> cooker command?
>
> Regards,
>
> _______________________________________________
> lime-dev mailing list
> lime-dev(a)lists.libremesh.org
> https://lists.libremesh.org/mailman/listinfo/lime-dev
_______________________________________________
lime-dev mailing list
lime-dev(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-dev
_______________________________________________
lime-dev mailing list
lime-dev(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-dev
2795
days inactive
2797
days old
6 comments
2 participants
participants (2)
-
Anthony Garcia -
Nicolas Pace