lime

lime-users@lists.libremesh.org

493 discussions

[lime-users] Errors while compiling LiMe based on OpenWRT19.07

by amuza

Hey, I'm trying to compile again LiMe based on OpenWRT 19.07, but now I get many errors. When I was in the configuration menu (make menuconfig) I could not find LiME packages, so I decided to start compiling again but now watching carefully to find errors. Please see below the first one I got: amuza@18.04:~/git$ sudo apt install --no-install-recommends git ca-certificates subversion wget make gcc g++ libncurses5-dev gawk unzip file patch python3-distutils python3-minimal python2-minimal libpython2-stdlib Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package python2-minimal E: Unable to locate package libpython2-stdlib I tried to get those two files for Ubuntu 18.04, but could not make it, I installed some similar files, but it keeps complaining. Please find attached a text file with all the errors I got after this one. Thank you very much.

4 years

[lime-users] no dhcp v4 on 19.07 GW

by Andy Schopf

I had less time to test, so this comes really late - The Problem exists since 2 weeks: I use an ex6150v2 to connect the Tesmesh to the Internet (1GBit ETH-Port manually assigned as WAN): I used openwrt 19.07.4 with libremesh 20.09 and got no IP V4 address. (And no: the babeld is running ;-) It is another Problem than in snapshot - which is solved atm). The connected Meshnotes give the Mobile Device an ip v4, so there it is working - but not connected to the "Gateway" (Neither in pa nor in apname Mode). So I checked and reverted the WAN Port to an LAN Port - the connected PC does also get any ip v4 address. I compiled new with 19.07 (as newly advised by Ilario) and libremesh (not branched to 20.09) Still the same behavior. Any thoughts on this? Regards, Andy

4 years

[lime-users] Wireless Battle of the Mesh conference today and tomorrow

by Ilario Gelmetti

In 45 minutes the (online) Wireless Battle of the Mesh is going to start, you can find the links for the streaming here: https://battlemesh.org/BattleMeshV13#Where The schedule of the talks is here: https://battlemesh.org/BattleMeshV13#Talk_Schedule_and_Workshops Ciao, Ilario -- Ilario iochesonome(a)gmail.com ilario(a)sindominio.net

4 years, 1 month

[lime-users] 19.07.3

by Juergen Kimmel

Going back to 19.07.3 because of ethernet time out errors in ramips I got this: WARNING: Makefile 'package/utils/busybox/Makefile' has a dependency on 'libpam', which does not exist WARNING: Makefile 'package/utils/busybox/Makefile' has a build dependency on 'libpam', which does not exist WARNING: Makefile 'package/network/utils/curl/Makefile' has a dependency on 'libgnutls', which does not exist WARNING: Makefile 'package/network/utils/curl/Makefile' has a dependency on 'libopenldap', which does not exist WARNING: Makefile 'package/network/utils/curl/Makefile' has a dependency on 'libidn2', which does not exist WARNING: Makefile 'package/network/utils/curl/Makefile' has a dependency on 'libssh2', which does not exist WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a dependency on 'libcap', which does not exist WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a dependency on 'libcap', which does not exist WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a dependency on 'libcap', which does not exist WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a dependency on 'libcap', which does not exist WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a dependency on 'libcap', which does not exist WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a dependency on 'libcap', which does not exist WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a dependency on 'libcap', which does not exist WARNING: Makefile 'package/network/utils/iproute2/Makefile' has a dependency on 'libcap', which does not exist WARNING: Makefile 'package/boot/kexec-tools/Makefile' has a dependency on 'liblzma', which does not exist WARNING: Makefile 'package/network/services/lldpd/Makefile' has a dependency on 'libnetsnmp', which does not exist WARNING: Makefile 'package/network/utils/nftables/Makefile' has a dependency on 'jansson', which does not exist -- Regards Jürgen

4 years, 1 month

[lime-users] eth0 timeout (APE522II)

by Juergen Kimmel

Hi Ilario, here info about the timeout. I read somewhere in the forum there is no other chance than go back to 19.07.3 or wait for 19.07.5. LiMe master development (master rev. 5f6c75e 20201019_1924) / LuCI openwrt-19.07 branch git-20.287.57033-3d52019 [ 1647.655283] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:320 0x802c39c0 [ 1647.662500] NETDEV WATCHDOG: eth0 (mtk_soc_eth): transmit queue 0 timed out [ 1647.669605] Modules linked in: rt2800soc rt2800mmio rt2800lib batman_adv rt2x00soc rt2x00mmio rt2x00lib nf_conntrack_ipv6 mt76x2e mt76x2_common mt76x02_lib mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE ebtable_nat ebtable_filter ebtable_broute cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD xt_CT nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack macvlan libcrc32c iptable_mangle iptable_filter ip_tables ebtables ebt_vlan ebt_stp ebt_redirect ebt_pkttype ebt_mark_m ebt_mark ebt_limit ebt_ip6 ebt_among ebt_802_3 crc_ccitt compat nf_log_ipv6 nf_log_common [ 1647.742155] ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 leds_gpio gpio_button_hotplug crc16 crc32c_generic crypto_hash [ 1647.756317] CPU: 0 PID: 0 Comm: swapper Not tainted 4.14.195 #0 [ 1647.762363] Stack : 8046dee0 80054358 80480000 8042d258 00000000 00000000 00000000 00000000 [ 1647.770917] 00000000 00000000 00000000 00000000 00000000 00000001 87c07de0 ac07f5da [ 1647.779455] 87c07e78 00000000 00000000 00004d40 00000038 803ccd58 00000008 00000000 [ 1647.788005] 00000000 80460000 000b8a5d 00000000 87c07dc0 00000000 00000000 8042710c [ 1647.796557] 802c39c0 00000140 8046df34 8046def4 00000002 80213fc0 00000000 805b0000 [ 1647.805111] ... [ 1647.807613] Call Trace: [ 1647.807625] [<80054358>] 0x80054358 [ 1647.813714] [<803ccd58>] 0x803ccd58 [ 1647.817287] [<802c39c0>] 0x802c39c0 [ 1647.820859] [<80213fc0>] 0x80213fc0 [ 1647.824426] [<8000aa50>] 0x8000aa50 [ 1647.827982] [<8000aa58>] 0x8000aa58 [ 1647.831562] [<80026480>] 0x80026480 [ 1647.835120] [<802c39c0>] 0x802c39c0 [ 1647.838686] [<80026508>] 0x80026508 [ 1647.842257] [<8026c120>] 0x8026c120 [ 1647.845837] [<802c39c0>] 0x802c39c0 [ 1647.849402] [<802c385c>] 0x802c385c [ 1647.852973] [<8005ffcc>] 0x8005ffcc [ 1647.856531] [<800012fc>] 0x800012fc [ 1647.860103] [<800601a0>] 0x800601a0 [ 1647.863683] [<8029d484>] 0x8029d484 [ 1647.867268] [<803d2808>] 0x803d2808 [ 1647.870839] [<8005a554>] 0x8005a554 [ 1647.874396] [<80055ab0>] 0x80055ab0 [ 1647.877969] [<80005e90>] 0x80005e90 [ 1647.881537] [ 1647.883055] ---[ end trace 86c64958f59af127 ]--- [ 1647.887773] mtk_soc_eth 10100000.ethernet eth0: transmit timed out [ 1647.894098] mtk_soc_eth 10100000.ethernet eth0: dma_cfg:80000065 [ 1647.900240] mtk_soc_eth 10100000.ethernet eth0: tx_ring=0, base=070d0000, max=1024, ctx=949, dtx=949, fdx=931, next=949 [ 1647.911269] mtk_soc_eth 10100000.ethernet eth0: rx_ring=0, base=070d4000, max=1024, calc=426, drx=428 [ 1650.197736] mtk_soc_eth 10100000.ethernet eth0: transmit timed out [ 1650.204086] mtk_soc_eth 10100000.ethernet eth0: dma_cfg:80000065 [ 1650.210254] mtk_soc_eth 10100000.ethernet eth0: tx_ring=0, base=06a38000, max=1024, ctx=332, dtx=332, fdx=224, next=332 [ 1650.221280] mtk_soc_eth 10100000.ethernet eth0: rx_ring=0, base=06a24000, max=1024, calc=166, drx=167 [ 1652.403225] mtk_soc_eth 10100000.ethernet eth0: transmit timed out [ 1652.409575] mtk_soc_eth 10100000.ethernet eth0: dma_cfg:80000065 [ 1652.415754] mtk_soc_eth 10100000.ethernet eth0: tx_ring=0, base=06a38000, max=1024, ctx=130, dtx=130, fdx=91, next=130 [ 1652.426697] mtk_soc_eth 10100000.ethernet eth0: rx_ring=0, base=070cc000, max=1024, calc=130, drx=132 [ 1656.116846] mtk_soc_eth 10100000.ethernet eth0: transmit timed out [ 1656.123193] mtk_soc_eth 10100000.ethernet eth0: dma_cfg:80000065 -- Regards Jürgen

4 years, 1 month

[lime-users] Fwd: WBMv13 is coming this weekend!

by Ilario Gelmetti

-------- Forwarded Message -------- Subject: [Battlemesh] WBMv13 is coming this weekend! Date: Tue, 10 Nov 2020 23:03:51 +0100 From: Paul Fuxjaeger <paul.fuxjaeger(a)gmx.at> Reply-To: battlemesh(a)ml.ninux.org To: Battle of the Mesh Mailing List <battlemesh(a)ml.ninux.org> Hi Battlemeshers! We are at ETA -4 days to WBMv13! Important information regarding the event: * Location * The event will be virtual, on a BigBlueButton instance hosted by Guifi.net & eXO.cat Barcelona and streamed to other platform(s). Final links will be announced on the wiki soon. Coordination, questions to speakers & other discussions takes place in the #battlemesh IRC and the Matrix channel (they are bridged) [1]. Please also note the wiki section called "hybrid spaces" [2]: local places where small teams may want to meetup while participating (observing local coronavirus restrictions). * Participants / Registration * Please check the participants page [3] to see if we've missed something and consider registering. It's not mandatory, but helps us to prepare capacity accordingly. * Schedule / Agenda * The schedule is almost done [4]. Some slots for lightning talks are still available, please reach out to mailto:v13@battlemesh.org to reserve one. To all speakers: please make sure that current slot assignment is OK for you. * Endorsements * Thanks for all the endorsers! If we have missed some, please let us know. See you on Saturday! WBMv13 orga team [1] https://battlemesh.org/BattleMeshV13#Online [2] https://battlemesh.org/BattleMeshV13#Hybrid_spaces [3] https://battlemesh.org/BattleMeshV13/Participants [4] https://battlemesh.org/BattleMeshV13#Talk_Schedule_and_Workshops

4 years, 1 month

[lime-users] No value in $RANDOM

by Andy Schopf

hi all, I found this output in logread: Tue Nov 10 10:24:00 2020 cron.err crond[4541]: USER root pid 7114 cmd ((sleep $(($RANDOM % 30)); /etc/shared-state/publishers/shared-state-publish_vouchers && shared-state sync pirania &> /dev/null)&) Tue Nov 10 10:24:00 2020 cron.err crond[4541]: USER root pid 7115 cmd ((for dataFile in /var/shared-state/data/* ; do shared-state bleach $(basename $dataFile .json); done &> /dev/null)&) Tue Nov 10 10:25:00 2020 cron.err crond[4541]: USER root pid 7133 cmd ((sleep $(($RANDOM % 120)); shared-state sync dnsmasq-leases &> /dev/null)&) Tue Nov 10 10:25:00 2020 cron.err crond[4541]: USER root pid 7134 cmd ((sleep $(($RANDOM % 120)); shared-state sync babeld-hosts &> /dev/null)&) Tue Nov 10 10:25:00 2020 cron.err crond[4541]: USER root pid 7135 cmd ((sleep $(($RANDOM % 120)); shared-state sync bat-hosts &> /dev/null)&) Tue Nov 10 10:25:00 2020 cron.err crond[4541]: USER root pid 7136 cmd ((sleep $(($RANDOM % 120)); shared-state sync nodes_and_links &> /dev/null)&) Tue Nov 10 10:25:00 2020 cron.err crond[4541]: USER root pid 7137 cmd ((sleep $(($RANDOM % 120)); shared-state sync dnsmasq-hosts &> /dev/null)&) Tue Nov 10 10:25:00 2020 cron.err crond[4541]: USER root pid 7138 cmd ( for file in /etc/alfred/* ; do [ -x $file ] && $file ; done ) Tue Nov 10 10:26:00 2020 cron.err crond[4541]: USER root pid 7154 cmd ((sleep $(($RANDOM % 30)); /etc/shared-state/publishers/shared-state-publish_vouchers && shared-state sync pirania &> /dev/null)&) I thought the output in the logilfe should be with the used values? I also got no return of an value by -> echo $RANDOM Where should this be initialized? Regards, Andy

4 years, 1 month

[lime-users] Meshnodes get any ipv4 addresses

by Andy Schopf

Hi all, I have since a few days the Problem, that my mesh nodes get any ipv4 addresses. So connected to the mesh node there is no way to the internet. Only on the Gateway Nodes. There I see only ipv6 addresses in direction to the mesh nodes. on the nodes the lime app shows no DNS and no ipv4/ipv6. Any suggestions? Regards, Andy

4 years, 1 month

[lime-users] Interfaces

by Juergen Kimmel

Physical (eth) settings of my devices for batadv_if Picostation M2: eth0_252 APE522II : eth0_252, eth0-1_252 and eth0-2_252 Why three interfaces for the APW522II having only two connectors? -- Regards Jürgen

4 years, 1 month

[lime-users] no cable connected at eth

by Juergen Kimmel

Picostation: Error: daemon.err babeld[1113]: Interface eth0_17 has no link-local address. APE522II no cable at eth0.1: no error -- Regards Jürgen

4 years, 1 month

← Newer
1
2
3
4
5
6
7
8
9
...
50
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

lime