30 Jul
2018
30 Jul
'18
1:10 p.m.
thanks to guifipedro, we got it working on the tplink wr1043n using
openwrt... As Guido said, the tricky part was to get both blue and yellow
ports to work. If anyone wants to see the configuration for the wr1043n,
i've attached:
/etc/config/dhcp
/etc/config/mwan3
/etc/config/network
/etc/config/system
/etc/config/wireless
thanks!
On Sat, Jul 28, 2018 at 10:59 PM, Ilario Gelmetti <iochesonome(a)gmail.com>
wrote:
On 07/28/2018 01:31 PM, Brian Russell wrote:
Has anyone managed to get a router with at least
3 gigabit ethernet
ports to perform services like redundancy or load balancing using the
multiwan packet?
Multiwan seems discontinued, you should use the mwan3 package:
https://wiki.openwrt.org/doc/howto/mwan3
I'd be interested in hearing your experience
and a
recommendation of what to buy, and how to configure the ports. Guido
(busy sailing these days) told me that the hard part is configuring the
ports, and that each configuration is hardware-specific...
I tried once, using a TpLink WDR3600 with plain OpenWrt (not LibreMesh)
for trying to have a stable connection out of two unreliable WWANs
(connected to the WDR3600 via cable, while WDR3600 was the AP and mwan3)
and it worked, no much configuration was needed indeed.
Ciao,
Ilario
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users