-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Good meshing, We would like to have a captive portal in our LiMe network. We have never played with those things. I think the one to use here is Nodogsplash. My question is: Is there any information I should have to make Nodogsplash work on Lime? Sorry to ask before even trying, but when reading about Nodogsplash I saw things on firewalls and iptables that made me wondered if Lime will work like a plain OpenWRT. Thanks! _______________________________________________ lime-users mailing list lime-users(a)lists.libremesh.org https://lists.libremesh.org/mailman/listinfo/lime-users

2016-12-10 12:21 GMT+01:00 Amuza <amuza(a)riseup.net>et>: I never played with it, but I will take advantage for asking a thing: we have a frozen repository from 2013 of nodogsplash in libremesh github profile, is it still useful? Shouldn't we delete it or update it? https://github.com/libremesh/nodogsplash _______________________________________________ lime-users mailing list lime-users(a)lists.libremesh.org https://lists.libremesh.org/mailman/listinfo/lime-users

I never played with it, but I will take advantage for asking a thing: we have a frozen repository from 2013 of nodogsplash in libremesh github profile, is it still useful? Shouldn't we delete it or update it? https://github.com/libremesh/nodogsplash <https://github.com/libremesh/nodogsplash>

_______________________________________________ when I installed it, i had some issues with libre-mesh repos. the 1509 repo contains the nodogsplash version that was tweaked to work in lime, so 'opkg install nodogsplash' works fine. but it was not ported to the 1605 repo, so you need to install it with the command i've sent in the last mail. it would be nice to have the working version in the 1605 repository too.

-- bruno(a)pobox.com <mailto:bruno@pobox.com> ▀─█▄██▄▀▄ http://brunovianna.net <http://brunovianna.net/> ─█▄██▄▀█▀█▄ skype: randomico▀─█▄██▄▀█▀█▄▌██─█▌█▌ _______________________________________________ lime-users mailing list lime-users(a)lists.libremesh.org https://lists.libremesh.org/mailman/listinfo/lime-users

i couldn't get the nodogsplash from openwrt repos to work in libre-mesh. instead, i used this version, which was tweaked by gui to work in libre-mesh: opkg install http://chef.altermundi.net/downloads/r44952/ar71xx/packages/routing/nodogsp… with the config file listed below. but if you can make it work with the standard nodogsplash, please let us know. ------------ GatewayInterface br-lan GatewayInterfaceExtra bmx+ GatewayInterfaceExtra2 anygw FirewallRuleSet authenticated-users { FirewallRule allow to 0.0.0.0/0 <http://0.0.0.0/0> } FirewallRuleSet users-to-router { # Nodogsplash automatically allows tcp to GatewayPort, # at GatewayAddress, to serve the splash page. # However you may want to open up other ports, e.g. # 53 for DNS and 67 for DHCP if the router itself is # providing these services. FirewallRule allow udp port 53 FirewallRule allow tcp port 53 FirewallRule allow udp port 67 # You may want to allow ssh, http, and https to the router # for administration from the GatewayInterface. If not, # comment these out. FirewallRule allow tcp port 22 FirewallRule allow tcp port 80 FirewallRule allow tcp port 443 } # end FirewallRuleSet users-to-router FirewallRuleSet preauthenticated-users { # For preauthenticated users to resolve IP addresses in their initial # request not using the router itself as a DNS server, # you probably want to allow port 53 udp and tcp for DNS. FirewallRule allow tcp port 53 FirewallRule allow udp port 53 # For splash page content not hosted on the router, you # will want to allow port 80 tcp to the remote host here. # Doing so circumvents the usual capture and redirect of # any port 80 request to this remote host. # Note that the remote host's numerical IP address must be known # and used here. #change the IP for the address of the gateway router FirewallRule allow tcp port 80 to 10.7.122.55 } # end FirewallRuleSet preauthenticated-users EmptyRuleSetPolicy preauthenticated-users passthrough EmptyRuleSetPolicy users-to-router passthrough #change the IP for the address of the gateway router GatewayName 10.7.122.55:80 <http://10.7.122.55:80> #GatewayPort 80 MaxClients 500 ClientIdleTimeout 720 ClientForceTimeout 14400 #change the range for the ip range of your mesh network GatewayIPRange 10.7.0.0/16 <http://10.7.0.0/16> BinVoucher "vale.sh" ForceVoucher yes EnablePreAuth yes #change to the place where you want to redirect the users after login RedirectURL http://www.quintanalibre.org.ar/portada ---------- On Mon, Dec 12, 2016 at 11:47 AM, Ilario &lt;iochesonome(a)gmail.com <mailto:iochesonome@gmail.com>> wrote: 2016-12-10 12:21 GMT+01:00 Amuza &lt;amuza(a)riseup.net <mailto:amuza@riseup.net>>: I never played with it, but I will take advantage for asking a thing: we have a frozen repository from 2013 of nodogsplash in libremesh github profile, is it still useful? Shouldn't we delete it or update it? https://github.com/libremesh/nodogsplash <https://github.com/libremesh/nodogsplash> _______________________________________________ lime-users mailing list lime-users(a)lists.libremesh.org <mailto:lime-users@lists.libremesh.org> https://lists.libremesh.org/mailman/listinfo/lime-users <https://lists.libremesh.org/mailman/listinfo/lime-users> -- bruno(a)pobox.com <mailto:bruno@pobox.com> ▀─█▄██▄▀▄ http://brunovianna.net <http://brunovianna.net/> ─█▄██▄▀█▀█▄ skype: randomico▀─█▄██▄▀█▀█▄▌██─█▌█▌ _______________________________________________ lime-users mailing list lime-users(a)lists.libremesh.org https://lists.libremesh.org/mailman/listinfo/lime-users